{"title":"Miniature Carbide Burrs","description":"\u003cp\u003e1\/8\" shank burrs for pencil and die grinders: detail work, small radii, lettering and tight internal corners.\u003c\/p\u003e","products":[{"product_id":"01v020","title":"1\/8\" x 9\/16\" SA-43 Cylindrical Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SA-43: a 1\/8\" cylindrical head with a 9\/16\" length of cut on a 1\/8\" shank. Deburring and flat surface work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SA-43 — Cylindrical\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V020\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685415919854,"sku":"01V020","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v020_83cc628c-75c5-426e-a119-63a080065b46.jpg?v=1791227011"},{"product_id":"01v021","title":"1\/8\" x 1\/8\" SD-42 Ball Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SD-42: a 1\/8\" ball head with a 1\/8\" length of cut on a 1\/8\" shank. Surface milling, deburring and contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SD-42 — Ball\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V021\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685416575214,"sku":"01V021","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v021_cf907d0b-5b3f-43c2-9ce4-8fbc3867941e.jpg?v=1791227013"},{"product_id":"01v022","title":"1\/8\" x 1\/2\" SF-42 Round Nose Tree Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SF-42: a 1\/8\" round nose tree head with a 1\/2\" length of cut on a 1\/8\" shank. Narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SF-42 — Round Nose Tree\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V022\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685417132270,"sku":"01V022","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v022_78228c60-85b3-475a-a018-a089302dd215.jpg?v=1791227014"},{"product_id":"01v023","title":"1\/8\" x 1\/2\" SG-44 Pointed Tree Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SG-44: a 1\/8\" pointed tree head with a 1\/2\" length of cut on a 1\/8\" shank. Surface milling and narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SG-44 — Pointed Tree\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V023\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685417459950,"sku":"01V023","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v023.jpg?v=1791227016"},{"product_id":"01v024","title":"1\/8\" x 1\/2\" SL-42 Cone, 14° Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SL-42: a 1\/8\" cone, 14° head with a 1\/2\" length of cut on a 1\/8\" shank. Surface machining and narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SL-42 — Cone, 14°\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V024\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685417885934,"sku":"01V024","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v024.jpg?v=1791227017"},{"product_id":"01v025","title":"1\/8\" x 7\/16\" SM-42 Conical Carbide Burr, Double Cut, 1\/8\" Shank","description":"\u003cp\u003eThe 1\/8\" shank burrs are for detail work: die sinking, small radii, lettering, cleaning up inside a tapped hole or a tight internal corner where a 1\/4\" burr simply will not fit. They run in a pencil grinder or a die grinder with a 1\/8\" collet, and because the head is small they want high speed and almost no pressure — these snap if you lean on them. Double cut throughout, so they finish as well as they remove. This is the SM-42: a 1\/8\" conical head with a 7\/16\" length of cut on a 1\/8\" shank. Surface machining and narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SM-42 — Conical\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 7\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Double Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V025\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1\/8\" shank for pencil and die grinders\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide\u003c\/li\u003e\n                \u003cli\u003eDouble cut for a controlled finish\u003c\/li\u003e\n                \u003cli\u003eHigh speed, very light pressure\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDetail and die-sinking work\u003c\/li\u003e\n                \u003cli\u003eSmall radii and internal corners\u003c\/li\u003e\n                \u003cli\u003eCleaning up tapped and cross-drilled holes\u003c\/li\u003e\n                \u003cli\u003eEngraving and lettering\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eCarbon Steel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eHardened Steel (45–60 Rc)\u003c\/li\u003e\n                \u003cli\u003eNickel Chrome Steel\u003c\/li\u003e\n                \u003cli\u003eWeldments\u003c\/li\u003e\n                \u003cli\u003eCast Iron\u003c\/li\u003e\n                \u003cli\u003eTitanium\u003c\/li\u003e\n                \u003cli\u003eInconel\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eBronze\u003c\/li\u003e\n                \u003cli\u003eFiberglass\u003c\/li\u003e\n                \u003cli\u003eHard Rubber\u003c\/li\u003e\n                \u003cli\u003ePlastics\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003ePencil Grinder\u003c\/li\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eRotary Tool\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685418279150,"sku":"01V025","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v025.jpg?v=1791227018"}],"url":"https:\/\/eldoradotools.com\/collections\/carbide-burrs-miniature.oembed","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}