{"title":"SDS-Max Core Bits","description":"","products":[{"product_id":"720max008","title":"8\" SDS-Max Tapered Extension","description":"\u003ch2\u003e8\" SDS-Max Tapered Extension\u003c\/h2\u003e\n\u003cp\u003eVendor: ITM\u003c\/p\u003e\n\n\u003cdiv class=\"infotop\"\u003e\n        \u003ch3\u003eAbout This Tool:\u003c\/h3\u003e\n        \u003cp class=\"p1\"\u003eUpgrade your SDS-Max rotary hammer with this heavy-duty 8\" Tapered Extension. Crafted from special alloy steel and Tungsten Carbide, this tool is built to endure continuous hammering. Perfect for professional use, it requires a pilot drill bit and extension for optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n            \u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 8\" SDS-Max Extension\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart #:\u003c\/strong\u003e 720MAX008\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \n        \u003cul id=\"dccheck\"\u003e\n            \u003ch3\u003eInstructions:\u003c\/h3\u003e\n                \u003cli\u003eEnsure the tapers are clean before use.\u003c\/li\u003e\n                \u003cli\u003eInsert the pilot drill into the drive extension.\u003c\/li\u003e\n                \u003cli\u003eSecure the drive extension into the core bit.\u003c\/li\u003e\n                \u003cli\u003eBegin drilling until 3\/8” deep, then remove the pilot drill.\u003c\/li\u003e\n                \u003cli\u003eContinue drilling until the core bit is filled, typically 3” deep.\u003c\/li\u003e\n                \u003cli\u003eBreak down drilled material with a chisel if needed.\u003c\/li\u003e\n                \u003cli\u003eRepeat until desired hole depth is reached.\u003c\/li\u003e\n        \u003c\/ul\u003e\n\n        \u003ch3\u003eAbout This Tool:\u003c\/h3\u003e\n        \u003cp class=\"p1\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Always use a pilot drill bit to prevent damage to the extension. Failure to do so may cause breakage, especially between the two slots. Please note that such breaks may not be covered under warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePopular uses for an 8\" SDS-Max Tapered Extension include:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty construction projects\u003c\/li\u003e\n\u003cli\u003eHVAC installations and repairs\u003c\/li\u003e\n\u003cli\u003eConcrete drilling for structural work\u003c\/li\u003e\n\u003cli\u003eRenovation and remodeling in commercial settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis size is commonly used in industries such as construction, HVAC, and general contracting due to its versatility and durability.\u003c\/p\u003e","brand":"ITM","offers":[{"title":"Default","offer_id":44208276078830,"sku":"720MAX008","price":71.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/core-drill-extensions_98cb9d2a-1ba9-4fdd-80ee-cbd5b2aa9fcf.jpg?v=1747267445"},{"product_id":"720max018","title":"18\" SDS-Max Tapered Extension","description":"\u003ch2\u003e18\" SDS-Max Tapered Extension\u003c\/h2\u003e\n\u003cp\u003eVendor: ITM\u003c\/p\u003e\n\n\u003cdiv class=\"infotop\"\u003e\n        \u003ch3\u003eAbout This Heavy Duty Tool:\u003c\/h3\u003e\n        \u003cp class=\"p1\"\u003eUpgrade your SDS-Max electric rotary hammer with this 18\" Tapered Extension. Crafted from special alloy steel and Tungsten Carbide, it can handle continuous hammering without breaking a sweat. Perfect for tough drilling tasks that demand precision and durability.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n            \u003ch3\u003eSpecifications:\u003c\/h3\u003e\n            \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 18\" SDS-Max Extension\u003c\/li\u003e\n            \u003cli\u003e\n\u003cstrong\u003ePart #:\u003c\/strong\u003e 720MAX018\u003c\/li\u003e\n        \u003c\/ul\u003e\n\n        \u003cul id=\"dccheck\"\u003e\n            \u003ch3\u003eInstructions:\u003c\/h3\u003e\n            \u003cli\u003eEnsure the tapers are clean before starting.\u003c\/li\u003e\n            \u003cli\u003eInsert the pilot drill into the drive extension.\u003c\/li\u003e\n            \u003cli\u003eFit the extension into the core bit securely.\u003c\/li\u003e\n            \u003cli\u003eBegin drilling until 3\/8” deep.\u003c\/li\u003e\n            \u003cli\u003eUse the ejector key to remove the pilot drill.\u003c\/li\u003e\n            \u003cli\u003eContinue drilling until the core bit is filled, around 3” deep.\u003c\/li\u003e\n            \u003cli\u003eIf needed, break the material inside the core bit with a chisel.\u003c\/li\u003e\n            \u003cli\u003eRepeat until you reach the desired hole depth.\u003c\/li\u003e\n        \u003c\/ul\u003e\n\n        \u003ch3\u003eImportant Note:\u003c\/h3\u003e\n        \u003cp class=\"p1\"\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e To prevent damage, always use a pilot drill bit when drilling with this extension. Failure to do so may lead to breakage, which is not covered under warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePopular uses for this 18\" SDS-Max Tapered Extension:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHVAC installation and repair projects\u003c\/li\u003e\n\u003cli\u003eConstruction sites requiring deep, precise holes\u003c\/li\u003e\n\u003cli\u003eEngineering and industrial applications where durability is key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustries commonly using this size:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction\u003c\/li\u003e\n\u003cli\u003eManufacturing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITM","offers":[{"title":"Default","offer_id":44208276111598,"sku":"720MAX018","price":95.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/core-drill-extensions_830eab7e-6917-4a61-bb91-ae7612d372da.jpg?v=1747267447"},{"product_id":"880sl1035","title":"2\" x 12\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e2\" x 12\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 2\" x 12\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 6\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580607897838,"sku":"880SL1035","price":204.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_a791a1b3-58b1-4b39-9c13-36357136242c.jpg?v=1789529561"},{"product_id":"880sl1045","title":"2\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e2\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 2\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 6\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580607963374,"sku":"880SL1045","price":239.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_85bf9083-da8f-4333-b975-263501fbecd4.jpg?v=1789529563"},{"product_id":"880sl1055","title":"2-3\/4\" x 12\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e2-3\/4\" x 12\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 2-3\/4\" x 12\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 6\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580607996142,"sku":"880SL1055","price":232.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_ab6389e1-409e-4e1f-aeda-aba967936586.jpg?v=1789529565"},{"product_id":"880sl1065","title":"2-3\/4\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e2-3\/4\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 2-3\/4\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2-3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 6\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608028910,"sku":"880SL1065","price":267.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_ca258ec6-c20f-4649-9cc5-3b47521ec7a5.jpg?v=1789529568"},{"product_id":"880sl1075","title":"3-1\/4\" x 12\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e3-1\/4\" x 12\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 3-1\/4\" x 12\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 8\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608061678,"sku":"880SL1075","price":290.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_c743c221-022d-4991-9f2e-9c2123bd7f81.jpg?v=1789529570"},{"product_id":"880sl1085","title":"3-1\/4\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e3-1\/4\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 3-1\/4\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 8\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608094446,"sku":"880SL1085","price":322.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_3044e2a6-afca-4420-aea5-2191da09c3c2.jpg?v=1789529572"},{"product_id":"880sl1095","title":"3-1\/2\" x 12\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e3-1\/2\" x 12\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 3-1\/2\" x 12\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 8\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608127214,"sku":"880SL1095","price":314.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_ade795d0-b1a9-48ae-b687-73c89afc9454.jpg?v=1789529575"},{"product_id":"880sl1105","title":"3-1\/2\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e3-1\/2\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 3-1\/2\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 8\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608159982,"sku":"880SL1105","price":343.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_f82b328f-dd97-4b2a-9452-3c9fc0ce9e08.jpg?v=1789529577"},{"product_id":"880sl1115","title":"4\" x 12\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e4\" x 12\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 4\" x 12\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 10\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608192750,"sku":"880SL1115","price":363.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_067f7bb9-e941-40ad-9f48-7ca2a89a6883.jpg?v=1789529579"},{"product_id":"880sl1125","title":"4\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e4\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 4\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 10\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608225518,"sku":"880SL1125","price":387.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_ab9659b4-9adc-40b9-af52-e6933d7ff075.jpg?v=1789529581"},{"product_id":"880sl1135","title":"5\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e5\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 5\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 12\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608258286,"sku":"880SL1135","price":457.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_e039f000-51cd-43c3-81b7-7090f959ca8d.jpg?v=1789529584"},{"product_id":"880sl1145","title":"6\" x 22\" 1-Pc SDS-Max Core Bit","description":"\u003ch2\u003e6\" x 22\" 1-Pc SDS-Max Core Bit\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThe 6\" x 22\" 1-Pc SDS-Max Core Bit by ITM cuts clean, round holes in concrete, brick, stone and masonry. One-piece\nconstruction and a special tungsten carbide tip stand up to continuous hammering, and the smooth\nbody keeps vibration down. Drills roughly 3\" deep before the core needs removing, and the 1\/2\" x 6\"\npilot drill is included.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 22\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 14\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Max\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003e1-Piece Construction\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eCopper \/ Silver Brazing\u003c\/li\u003e\n                \u003cli\u003eSmooth Body For Less Vibration\u003c\/li\u003e\n                \u003cli\u003eClean Round Holes\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003e3\" Cutting Depth Before Core Removal\u003c\/li\u003e\n                \u003cli\u003e1\/2\" x 6\" Pilot Drill Included\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608291054,"sku":"880SL1145","price":574.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-max-core-bit-head_6afa875d-e41b-486c-956f-b34b9dd9a668.jpg?v=1789529586"},{"product_id":"880pd1143","title":"1\/2\" x 5\" Threaded Pilot Drill","description":"\u003ch2\u003e1\/2\" x 5\" Threaded Pilot Drill\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eThreaded replacement pilot drill for ITM 1-Pc SDS-Max core bits. The pilot centres the core bit\nat the start of the hole; this is the spare for when the original wears out, so the core bit keeps\ncutting true.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFitting:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eThreaded Replacement Pilot Drill\u003c\/li\u003e\n                \u003cli\u003eSpecial Tungsten Carbide Tip\u003c\/li\u003e\n                \u003cli\u003eFits ITM 1-Pc SDS-Max Core Bits\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580608323822,"sku":"880PD1143","price":21.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-pilot-drill.jpg?v=1789680482"}],"url":"https:\/\/eldoradotools.com\/collections\/sds-max-core-bits.oembed","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}