{"title":"SDS-Plus Rebar Cutters","description":"\u003cp\u003eAnyone drilling concrete for anchors or dowels will eventually hit rebar. SDS-Plus rebar cutters and punchers are made to go through the steel instead of stopping the job. The range is ITM, with both Rebar Cutter and Rebar Puncher listings from 3\/8\" to 1-1\/2\" in diameter, in 8\", 12\" and 18\" lengths.\u003c\/p\u003e\n\u003ch3\u003eDrilling tips\u003c\/h3\u003e\n\u003cp\u003eUse an SDS-Plus rotary hammer with hammer action on. Hold the tool straight, use a steady feed and do not lean on it. Cutting steel is slower than cutting concrete. Back out now and then to clear dust and metal.\u003c\/p\u003e\n\u003cp\u003eChoose the diameter for the hole you need and a length that clears the full depth. Confirm with the drawings or the engineer before you cut structural rebar, because a hole that crosses bars can weaken a slab or beam. For larger holes, see \u003ca href=\"\/collections\/sds-max-rebar-cutters\"\u003eSDS-Max rebar cutters\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFree shipping on orders over $200. Trade accounts can reorder in a click from \u003ca href=\"\/pages\/my-toolbox\"\u003eMy Toolbox\u003c\/a\u003e, or call (833) 438-6657.\u003c\/p\u003e","products":[{"product_id":"rt-6","title":"3\/8\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580654821614,"sku":"RT-6","price":48.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_40e11272-1f40-4567-8744-89083c9ad614.jpg?v=1790708294"},{"product_id":"rt-6-18","title":"3\/8\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580654952686,"sku":"RT-6-18","price":69.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_e04c2d26-aa8a-4e64-9c7a-906a15cf00ba.jpg?v=1790708301"},{"product_id":"rt-8","title":"1\/2\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580654985454,"sku":"RT-8","price":74.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_899f5acb-f81f-46f2-b235-798c1501bd19.jpg?v=1790708331"},{"product_id":"rt-8-18","title":"1\/2\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655083758,"sku":"RT-8-18","price":95.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_9831fe1a-f62d-4bef-8c8b-c1d7eb6c0f33.jpg?v=1790708345"},{"product_id":"rt-10","title":"5\/8\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655214830,"sku":"RT-10","price":83.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_caa20fba-e974-435e-82b3-12e6189db71d.jpg?v=1790708340"},{"product_id":"rt-10-18","title":"5\/8\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655378670,"sku":"RT-10-18","price":93.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_c3579726-ba2e-4ee7-961d-b71a47a2ac22.jpg?v=1790708301"},{"product_id":"rt-12","title":"3\/4\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655509742,"sku":"RT-12","price":92.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_02b42603-5bb8-4308-9805-ee23936aeefe.jpg?v=1790708299"},{"product_id":"rt-12-18","title":"3\/4\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655608046,"sku":"RT-12-18","price":101.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_bdc591d4-1cd2-4570-b73e-e0f4d843f5bc.jpg?v=1790708305"},{"product_id":"rt-14","title":"7\/8\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655673582,"sku":"RT-14","price":94.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_13d79934-bef4-4ae5-ac6b-f5689589c2c2.jpg?v=1790708335"},{"product_id":"rt-14-18","title":"7\/8\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655804654,"sku":"RT-14-18","price":103.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_f9a71337-4059-4664-b606-cb52b01cac1d.jpg?v=1790708349"},{"product_id":"rt-16","title":"1\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580655935726,"sku":"RT-16","price":97.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_276dce2c-6f56-4d71-9954-8fab710f720f.jpg?v=1790708344"},{"product_id":"rt-16-18","title":"1\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580656066798,"sku":"RT-16-18","price":134.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_49dcbee3-c0c3-4d53-a11d-d1776e04e763.jpg?v=1790708309"},{"product_id":"rt-18","title":"1-1\/8\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580656132334,"sku":"RT-18","price":123.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_37dd8dec-5190-49bd-95b5-26c6b932df61.jpg?v=1790708303"},{"product_id":"rt-18-18","title":"1-1\/8\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580656165102,"sku":"RT-18-18","price":138.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_a394b9f9-fde5-44d1-901e-a371c7de3bf7.jpg?v=1790708308"},{"product_id":"rt-20","title":"1-1\/4\" x 12\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580656197870,"sku":"RT-20","price":132.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_16376a51-0b34-43ac-9dca-0e2260533544.jpg?v=1790708339"},{"product_id":"rt-20-18","title":"1-1\/4\" x 18\" SDS-Plus Rebar Puncher","description":"\u003cp\u003ePunches straight through rebar in rotary hammer mode — about twice the speed of chipping it out. Tungsten carbide teeth, best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eUse in Rotary Hammer Action\u003c\/li\u003e\n                \u003cli\u003eTungsten Carbide Teeth\u003c\/li\u003e\n                \u003cli\u003eTwice the Speed\u003c\/li\u003e\n                \u003cli\u003eIndustrial Quality\u003c\/li\u003e\n                \u003cli\u003eSold Individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eReinforced Concrete\u003c\/li\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49580656230638,"sku":"RT-20-18","price":146.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rt-rebar-puncher_b9cfea1f-c425-4d52-ba4d-ce2aabe64eba.jpg?v=1790708356"},{"product_id":"rbs-6","title":"3\/8\" x 8\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-6\"\u003e3\/8\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 850-1200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600653295854,"sku":"RBS-6","price":40.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_1e98d576-fb51-42bb-8b53-bf86997ffd6f.jpg?v=1790708353"},{"product_id":"rbs-8","title":"1\/2\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-8\"\u003e1\/2\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 850-1200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600654180590,"sku":"RBS-8","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_2215bc3a-106b-476c-8af7-e70b029e9234.jpg?v=1790708349"},{"product_id":"rbs-9","title":"9\/16\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/collections\/rebar-cutters\"\u003eRebar Punchers\u003c\/a\u003e run in rotary hammer mode, cut about twice as fast, and are best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 850-1200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600656310510,"sku":"RBS-9","price":44.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_2b7c159e-f5e3-4193-9438-82f677132c15.jpg?v=1790708350"},{"product_id":"rbs-10","title":"5\/8\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-10\"\u003e5\/8\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 750-1000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600657391854,"sku":"RBS-10","price":53.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_e734eda5-f4ec-4341-8130-b7a9155321b4.jpg?v=1790708382"},{"product_id":"rbs-11","title":"11\/16\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/collections\/rebar-cutters\"\u003eRebar Punchers\u003c\/a\u003e run in rotary hammer mode, cut about twice as fast, and are best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 11\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 750-1000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600658997486,"sku":"RBS-11","price":57.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_b5d14879-fed2-4c94-97b1-6e48b19530ea.jpg?v=1790708402"},{"product_id":"rbs-12","title":"3\/4\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-12\"\u003e3\/4\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 600-850 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600659357934,"sku":"RBS-12","price":59.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_b1f37f58-c58b-4d04-901a-c5f54bc49ebd.jpg?v=1790708388"},{"product_id":"rbs-13","title":"13\/16\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/collections\/rebar-cutters\"\u003eRebar Punchers\u003c\/a\u003e run in rotary hammer mode, cut about twice as fast, and are best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 13\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 600-850 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600660406510,"sku":"RBS-13","price":72.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_12d1c4a9-f2bf-4331-ad56-83a91782f71b.jpg?v=1790708355"},{"product_id":"rbs-14","title":"7\/8\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-14\"\u003e7\/8\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 600-850 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600661553390,"sku":"RBS-14","price":84.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_71e1edb9-a8fa-465f-9b6a-cc431ba26472.jpg?v=1790708351"},{"product_id":"rbs-16","title":"1\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-16\"\u003e1\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 500-750 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600661586158,"sku":"RBS-16","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_5b22474a-69ac-42d7-a380-adda8ddd7f7f.jpg?v=1790708353"},{"product_id":"rbs-18","title":"1-1\/8\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-18\"\u003e1-1\/8\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 500-750 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600662175982,"sku":"RBS-18","price":95.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_101424fc-b4a1-45a4-af2c-a08d77cb65af.jpg?v=1790708385"},{"product_id":"rbs-20","title":"1-1\/4\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/products\/rt-20\"\u003e1-1\/4\" SDS-Plus Rebar Puncher\u003c\/a\u003e runs in rotary hammer mode, cuts about twice as fast, and is best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 450-600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600662896878,"sku":"RBS-20","price":101.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_bc2e7f55-b5e4-412c-88e1-ea92cec77966.jpg?v=1790708405"},{"product_id":"rbs-22","title":"1-3\/8\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/collections\/rebar-cutters\"\u003eRebar Punchers\u003c\/a\u003e run in rotary hammer mode, cut about twice as fast, and are best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 450-600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600663453934,"sku":"RBS-22","price":110.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_c723c34c-fff1-4b49-918e-1389a83e1638.jpg?v=1790708392"},{"product_id":"rbs-24","title":"1-1\/2\" x 12\" SDS-Plus Rebar Cutter","description":"\u003cp\u003eA carbide-toothed rebar cutter for when your hole runs into steel. Chuck it in an SDS-Plus rotary hammer, run it in rotation only, and it cuts through the rebar so the concrete bit can finish the hole. It is a problem solver, not a concrete bit: never use it to drill concrete. Expect a limited life: by ITM's own figures, a 1\/2\" cutter that meets #6 (3\/4\") rebar dead center may drill 5 to 10 holes at the correct speed and pressure, and it is not unusual for a cutter to cut only one bar. Rebar cutters are not warrantied for replacement or repair.\u003c\/p\u003e\n\n\u003cp\u003eCutting a lot of rebar? ITM's \u003ca href=\"https:\/\/eldoradotools.com\/collections\/rebar-cutters\"\u003eRebar Punchers\u003c\/a\u003e run in rotary hammer mode, cut about twice as fast, and are best on #5 (5\/8\") rebar and under.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eOverall Length:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e 350-500 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMode:\u003c\/strong\u003e Rotation only, no hammer\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eTungsten carbide cutting teeth\u003c\/li\u003e\n                \u003cli\u003eCuts rebar hit while drilling reinforced concrete\u003c\/li\u003e\n                \u003cli\u003eRotation only\u003c\/li\u003e\n                \u003cli\u003eSold individually, one per tube\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use in:\u003c\/h3\u003e\n                \u003cli\u003eRebar\u003c\/li\u003e\n                \u003cli\u003eReinforced Concrete (cutting the bar, not the concrete)\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49600664043758,"sku":"RBS-24","price":116.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-rbs-rebar-cutter-sds-plus_be7f9bac-6bf7-4953-854e-059bf2ec0cdb.jpg?v=1790708358"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/collections\/itm-rbs-rebar-cutter-sds-plus_00512c73-b4dd-4f06-9bca-92c1beab0e25.jpg?v=1790707306","url":"https:\/\/eldoradotools.com\/collections\/sds-plus-rebar-cutters.oembed?page=2","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}