{"title":"Automotive: Paint \u0026 Rust Stripping","description":"\u003cp\u003eRust repair and weld prep both start by getting back to clean metal. This step holds the brushes and discs for stripping paint, rust and scale off a panel, a rocker or a frame rail.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire cup brushes\u003c\/strong\u003e in 3\" to 5\", crimped and knot-twisted, in carbon steel and stainless, with M14 x 2.0 or 5\/8\"-11 arbor threads for angle grinders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounted cup brushes\u003c\/strong\u003e from 1-1\/2\" to 3\" on a 1\/4\" shank for die grinders and drills, for corners and seams.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQUICK-STEP XX hook and loop discs\u003c\/strong\u003e in 4-1\/2\" to 6\", 120 to 180 grit, for feathering paint edges and finishing bare metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStrip without cutting in\u003c\/h3\u003e\n\u003cp\u003eWire brushes remove rust and paint but they also scratch and can throw wire, so wear a face shield or safety glasses and keep the speed under the brush's rating. Use stainless brushes on stainless and aluminum so carbon steel does not embed in the surface. Let the brush do the work and keep it moving.\u003c\/p\u003e\n\u003cp\u003eFree shipping on orders over $200. Trade accounts can reorder in a click from \u003ca href=\"\/es\/pages\/my-toolbox\"\u003eMy Toolbox\u003c\/a\u003e, or call (833) 438-6657.\u003c\/p\u003e","products":[{"product_id":"15v412","title":"4-1\/2\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 4-1\/2\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 7,400 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V412\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348139758,"sku":"15V412","price":2.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v412_4614380e-0f45-464d-a493-bc05e133cd35.jpg?v=1790918424"},{"product_id":"15v418","title":"4-1\/2\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 4-1\/2\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 7,400 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V418\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348172526,"sku":"15V418","price":2.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v418_47038d52-d209-4332-8d76-3e94f4720d1d.jpg?v=1790918425"},{"product_id":"15v512","title":"5\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 5\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 6,150 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V512\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348270830,"sku":"15V512","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v512_568915d6-6d6d-49c1-bb64-52a893787a34.jpg?v=1790918426"},{"product_id":"15v518","title":"5\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 5\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 6,150 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V518\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348303598,"sku":"15V518","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v518_9cefb782-90b7-443d-88d5-4001edba3437.jpg?v=1790918427"},{"product_id":"15v612","title":"6\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 6\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 5,100 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V612\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348369134,"sku":"15V612","price":3.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v612_68688c0b-8f74-4585-b354-fcd0d9d99e48.jpg?v=1790918428"},{"product_id":"15v618","title":"6\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 6\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 5,100 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V618\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348401902,"sku":"15V618","price":3.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v618.jpg?v=1790918430"},{"product_id":"09c015","title":"1-1\/2\" ALLSTEEL Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 1-1\/2\" crimped cup brush on a 1\/4\" shank, 0.0118\" carbon steel wire. Sold individually, minimum order 4.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09C015\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 4\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark Grey= Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 4.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning rust, scale, and paint in hard to reach areas\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752587927790,"sku":"09C015","price":6.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09c015.jpg?v=1791928605"},{"product_id":"09c018","title":"2-3\/8\" ALLSTEEL Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 2-3\/8\" crimped cup brush on a 1\/4\" shank, 0.0118\" carbon steel wire. Sold individually, minimum order 3.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2-3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09C018\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 3\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark Grey= Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 3.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning rust, scale, and paint in hard to reach areas\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752587960558,"sku":"09C018","price":9.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09c018.jpg?v=1791928608"},{"product_id":"09c065","title":"1-1\/2\" ALLSTEEL Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Stainless Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 1-1\/2\" crimped cup brush on a 1\/4\" shank, 0.0118\" stainless steel wire. Sold individually, minimum order 4.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09C065\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 4\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark Grey= Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 4.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning rust, scale, and paint in hard to reach areas\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752587993326,"sku":"09C065","price":8.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09c065.jpg?v=1791928610"},{"product_id":"09c068","title":"2-3\/8\" ALLSTEEL Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Stainless Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 2-3\/8\" crimped cup brush on a 1\/4\" shank, 0.0118\" stainless steel wire. Sold individually, minimum order 3.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2-3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09C068\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 3\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark Grey= Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 3.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning rust, scale, and paint in hard to reach areas\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752588091630,"sku":"09C068","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09c068.jpg?v=1791928612"},{"product_id":"09c370","title":"3\" ALLSTEEL Knot-Twisted Wire Mounted Cup Brush, 1\/4\" Shank, .020\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 3\" knot-twisted cup brush on a 1\/4\" shank, 0.020\" carbon steel wire. Sold individually, minimum order 3.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09C370\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 3\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark Grey= Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 3.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning rust, scale, and paint in hard to reach areas\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752588124398,"sku":"09C370","price":10.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09c370-v2.jpg?v=1791929083"},{"product_id":"13c015","title":"1-1\/2\" Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 1-1\/2\" crimped cup brush on a 1\/4\" shank, 0.0118\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 18 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C015\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592580846,"sku":"13C015","price":13.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c015.jpg?v=1791928871"},{"product_id":"13c018","title":"2-3\/8\" Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 2-3\/8\" crimped cup brush on a 1\/4\" shank, 0.0118\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2-3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C018\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592613614,"sku":"13C018","price":18.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c018-v2.jpg?v=1791929087"},{"product_id":"13c065","title":"1-1\/2\" Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 1-1\/2\" crimped cup brush on a 1\/4\" shank, 0.0118\" stainless steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 18 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C065\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592646382,"sku":"13C065","price":16.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c065-v2.jpg?v=1791929094"},{"product_id":"13c068","title":"2-3\/8\" Crimped Wire Mounted Cup Brush, 1\/4\" Shank, .0118\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 2-3\/8\" crimped cup brush on a 1\/4\" shank, 0.0118\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2-3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,800 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C068\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592679150,"sku":"13C068","price":25.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c068-v2.jpg?v=1791929096"},{"product_id":"13c370","title":"3\" Knot-Twisted Wire Mounted Cup Brush, 1\/4\" Shank, .020\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 3\" knot-twisted cup brush on a 1\/4\" shank, 0.020\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C370\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592711918,"sku":"13C370","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c370.jpg?v=1791928881"},{"product_id":"13d302","title":"3\" x M14 x 2.0 Crimped Wire Cup Brush, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" crimped cup brush with a M14 x 2.0 threaded hub, 0.0118\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e M14 x 2.0\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D302\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592777454,"sku":"13D302","price":20.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d302.jpg?v=1791928884"},{"product_id":"13d304","title":"3\" x 5\/8\"-11 Crimped Wire Cup Brush, .0118\" Carbon Steel, 22 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D304\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592810222,"sku":"13D304","price":20.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d304.jpg?v=1791928886"},{"product_id":"13d314","title":"3\" x 5\/8\"-11 Crimped Wire Cup Brush, .0118\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D314\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592842990,"sku":"13D314","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d314.jpg?v=1791928888"},{"product_id":"13d324","title":"3\" x 5\/8\"-11 Crimped Wire Cup Brush, .0118\" Carbon Steel, with Ring","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D324\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592875758,"sku":"13D324","price":26.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d324.jpg?v=1791928892"},{"product_id":"13d424","title":"4\" x 5\/8\"-11 Crimped Wire Cup Brush, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 4\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 10,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 6,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D424\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752592908526,"sku":"13D424","price":41.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d424.jpg?v=1791928894"},{"product_id":"13d524","title":"5\" x 5\/8\"-11 Crimped Wire Cup Brush, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13D524\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593170670,"sku":"13D524","price":53.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13d524.jpg?v=1791928897"},{"product_id":"13e504","title":"5\" x 5\/8\"-11 Crimped Wire Cup Brush, .020\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 28 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13E504\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593203438,"sku":"13E504","price":38.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13e504.jpg?v=1791928899"},{"product_id":"13e514","title":"5\" x 5\/8\"-11 Crimped Wire Cup Brush, .020\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 28 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13E514\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593236206,"sku":"13E514","price":86.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13e514.jpg?v=1791928901"},{"product_id":"13f300","title":"3\" x M10 x 1.25 Knot-Twisted Wire Cup Brush, .015\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a M10 x 1.25 threaded hub, 0.015\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e M10 x 1.25\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.015\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13F300\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593268974,"sku":"13F300","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13f300.jpg?v=1791928904"},{"product_id":"13f302","title":"3\" x M14 x 2.0 Knot-Twisted Wire Cup Brush, .015\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a M14 x 2.0 threaded hub, 0.015\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e M14 x 2.0\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.015\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13F302\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593367278,"sku":"13F302","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13f302.jpg?v=1791928907"},{"product_id":"13f304","title":"3\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .015\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.015\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.015\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13F304\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593400046,"sku":"13F304","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13f304.jpg?v=1791928910"},{"product_id":"13f314","title":"3\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .015\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.015\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.015\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13F314\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593432814,"sku":"13F314","price":46.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13f314.jpg?v=1791928912"},{"product_id":"13f354","title":"3\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Carbon Steel, 20 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13F354\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593465582,"sku":"13F354","price":23.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13f354.jpg?v=1791928915"},{"product_id":"13g304","title":"3\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Carbon Steel, with Ring, 18 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 18 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G304\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593498350,"sku":"13G304","price":33.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g304-v2.jpg?v=1791929098"},{"product_id":"13g314","title":"3\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 18 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G314\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593531118,"sku":"13G314","price":57.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g314.jpg?v=1791928920"},{"product_id":"13g404","title":"4\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 4\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G404\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593563886,"sku":"13G404","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g404-v2.jpg?v=1791929102"},{"product_id":"13g504","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Carbon Steel, with Ring, 25 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G504\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593596654,"sku":"13G504","price":45.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g504-v2.jpg?v=1791929105"},{"product_id":"13g514","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Stainless Steel, with Ring, 25 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G514\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593694958,"sku":"13G514","price":103.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g514.jpg?v=1791928928"},{"product_id":"13g554","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .035\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.035\" carbon steel wire, with a support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.035\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G554\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593727726,"sku":"13G554","price":45.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g554-v2.jpg?v=1791929109"},{"product_id":"13g574","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Carbon Steel, Double Row with Ring, 30 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire, with a double-row knot and support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G574\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSafety supporting ring\u003c\/li\u003e\n                \u003cli\u003eTop quality wire\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593760494,"sku":"13G574","price":74.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g574.jpg?v=1791928932"},{"product_id":"13g584","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Cup Brush, .020\" Stainless Steel, Double Row with Ring, 30 mm Trim","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire, with a double-row knot and support ring that keeps the wires tight for longer life. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSupport ring:\u003c\/strong\u003e Yes\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 8,600 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 5,160 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13G584\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593793262,"sku":"13G584","price":161.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13g584.jpg?v=1791928935"},{"product_id":"13h404","title":"4\" x 5\/8\"-11 Knot-Twisted Wire Saucer Cup Brush, .015\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 4\" knot-twisted saucer cup brush with a 5\/8\"-11 threaded hub, 0.015\" carbon steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.015\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 20,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13H404\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593858798,"sku":"13H404","price":27.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13h404.jpg?v=1791928940"},{"product_id":"13h414","title":"4\" x 5\/8\"-11 Knot-Twisted Wire Saucer Cup Brush, .020\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 4\" knot-twisted saucer cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 20,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13H414\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593891566,"sku":"13H414","price":41.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13h414.jpg?v=1791928942"},{"product_id":"13h504","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Saucer Cup Brush, .020\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted saucer cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 26 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 15,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 9,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13H504\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752593924334,"sku":"13H504","price":34.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13h504.jpg?v=1791928945"},{"product_id":"13h514","title":"5\" x 5\/8\"-11 Knot-Twisted Wire Saucer Cup Brush, .020\" Stainless Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. This is the 5\" knot-twisted saucer cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 26 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 15,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 9,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13H514\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Orange = Carbon Steel; Blue= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594022638,"sku":"13H514","price":52.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13h514.jpg?v=1791928948"},{"product_id":"13w301","title":"3\" x 5\/8\"-11 ALLSTEEL Crimped Wire Cup Brush, .0118\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. Available in a variety of shapes and sizes. This is the 3\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W301\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594120942,"sku":"13W301","price":13.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w301.jpg?v=1791928958"},{"product_id":"13w302","title":"3\" x 5\/8\"-11 ALLSTEEL Crimped Wire Cup Brush, .0118\" Stainless Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 3\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.0118\" stainless steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 22 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W302\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594153710,"sku":"13W302","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w302.jpg?v=1791928960"},{"product_id":"13w311","title":"3\" x 5\/8\"-11 ALLSTEEL Knot-Twisted Wire Cup Brush, .020\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" carbon steel wire. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W311\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594186478,"sku":"13W311","price":15.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w311.jpg?v=1791928962"},{"product_id":"13w312","title":"3\" x 5\/8\"-11 ALLSTEEL Knot-Twisted Wire Cup Brush, .020\" Stainless Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 3\" knot-twisted cup brush with a 5\/8\"-11 threaded hub, 0.020\" stainless steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Knot-Twisted\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.020\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 20 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W312\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eStainless steel wire brushes made with grade 34 stainless wire\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594252014,"sku":"13W312","price":31.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w312.jpg?v=1791928965"},{"product_id":"13w431","title":"4\" x 5\/8\"-11 ALLSTEEL Crimped Wire Saucer Cup Brush, .0118\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 4\" crimped saucer cup brush with a 5\/8\"-11 threaded hub, 0.0118\" carbon steel wire. Sold individually, minimum order 3.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 19 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,500 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 7,500 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W431\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 3\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 3.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594284782,"sku":"13W431","price":9.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w431.jpg?v=1791928968"},{"product_id":"13w501","title":"5\" x 5\/8\"-11 ALLSTEEL Crimped Wire Cup Brush, .014\" Carbon Steel","description":"\u003cp\u003eALLSTEEL wire brushes are designed to provide exceptional value and deliver consistent and reliable surface cleaning performance on a variety of metals. Through a strict quality-controlled manufacturing process, ALLSTEEL brushes are perfectly balanced and feature an identical wire count to ensure vibration-free brushing. This is the 5\" crimped cup brush with a 5\/8\"-11 threaded hub, 0.014\" carbon steel wire. Sold individually.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"-11\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e 0.014\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 26 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 15000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 9,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13W501\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eHigh-quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eGuaranteed not to contaminate your work piece\u003c\/li\u003e\n                \u003cli\u003eColor coded hubs for easy identification: Dark grey = Carbon Steel; White= Stainless Steel\u003c\/li\u003e\n                \u003cli\u003eSold individually.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49752594317550,"sku":"13W501","price":26.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13w501.jpg?v=1791928970"},{"product_id":"13c128","title":"4\" x 1\/4\" Crimped Wire Mounted Wheel Brush, 1\/4\" Shank, .0118\" Carbon Steel","description":"\u003cp\u003eMade from industrial quality wire, oil hardened steel or 304 stainless, and perfectly balanced for smooth operation and long life. With unmatched wire quality and brush construction WALTER wire brushes provide significantly less breakage than the competition. Choose WALTER for the safest and most consistent performance on the job. Color coded for easy identification in the shop. Most commonly used to remove paint, rust and corrosion or for light deburring and cleaning jobs. Mandrels sold separately. This is the 4\" x 1\/4\" Crimped Wire Mounted Wheel Brush, 1\/4\" Shank, .0118\" Carbon Steel. Sold individually, minimum order 2.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFace width:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire:\u003c\/strong\u003e Crimped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire diameter:\u003c\/strong\u003e .0118\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eWire material:\u003c\/strong\u003e Carbon Steel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTrim length:\u003c\/strong\u003e 25 mm\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e Wheel\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 15,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eRecommended speed:\u003c\/strong\u003e 9,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 13C128\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each, minimum 2\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePremium quality wire\u003c\/li\u003e\n                \u003cli\u003ePerfect balance and even wire count\u003c\/li\u003e\n                \u003cli\u003eAll Walter brushes are manufactured in accordance with ANSI B165.1 (American standard) and UNI EN 1083-2 (European standard)\u003c\/li\u003e\n                \u003cli\u003eSold individually, minimum order 2.\u003c\/li\u003e\n                \u003cli\u003eTip: Always work on the tip of the wires for better removal and longer life\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRust \u0026amp; corrosion removal\u003c\/li\u003e\n                \u003cli\u003eFlux cleaning between weld passes\u003c\/li\u003e\n                \u003cli\u003ePaint removal\u003c\/li\u003e\n                \u003cli\u003eLight mill scale \u0026amp; oxide removal\u003c\/li\u003e\n                \u003cli\u003eDeburring\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n                \u003cli\u003eDrill\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49822559011054,"sku":"13C128","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-13c128.jpg?v=1792620298"},{"product_id":"53g243","title":"BIO-RUST Rust and Mineral Remover, 500 mL (16.9 oz) Sprayer Bottle","description":"\u003cp\u003eNon-caustic rust removers that safely eliminates rust on all ferrous alloys. Soak for up to 24 hours for best results. Non-hazardous, OSHA, and WHMIS compliant. This is the BIO-RUST Rust and Mineral Remover, 500 mL (16.9 oz) Sprayer Bottle. Priced per bottle, sold by the case of 12.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e BIO-RUST\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eContainer size:\u003c\/strong\u003e 500 mL (16.9 oz)\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eContainer:\u003c\/strong\u003e Sprayer bottle\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eForm:\u003c\/strong\u003e Liquid\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eConcentration:\u003c\/strong\u003e Ready-to-use, Non-dilutable\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Water-based\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003epH:\u003c\/strong\u003e Slightly acidic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFlammability:\u003c\/strong\u003e Not flammable\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 53G243\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Case of 12, priced per bottle\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eNonflammable, solvent-free, phosphate-free, VOC-free\u003c\/li\u003e\n                \u003cli\u003eNeutral range pH, non-caustic and biodegradable\u003c\/li\u003e\n                \u003cli\u003eRemoves rust without attacking surface material\u003c\/li\u003e\n                \u003cli\u003eNon hazardous—OSHA and WHMIS compliant\u003c\/li\u003e\n                \u003cli\u003eHigh workload—can remove 1.0kg (2.2lbs) of iron oxide per 20L (5 gallons)\u003c\/li\u003e\n                \u003cli\u003eNSF Category A2, Register #146173\u003c\/li\u003e\n                \u003cli\u003eReduces scrap rate\u003c\/li\u003e\n                \u003cli\u003eRequires less time and effort than abrasives\u003c\/li\u003e\n                \u003cli\u003eSafe to handle and store\u003c\/li\u003e\n                \u003cli\u003ePriced per bottle, sold by the case of 12.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eRemoval of rust and other metallic particles\u003c\/li\u003e\n                \u003cli\u003eDesigned for immersion applications only.\u003c\/li\u003e\n                \u003cli\u003eDeeply rusted parts may require longer soaking time.\u003c\/li\u003e\n                \u003cli\u003eAfter application of BIO-RUST, rinse parts in water to remove loosened contaminants.\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49822559142126,"sku":"53G243","price":22.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-53g243.jpg?v=1792620300"},{"product_id":"04u321","title":"3\" TWIST BLENDEX U Quick-Change Disc, 2SF","description":"\u003cp\u003eDesigned for deburring, cleaning, blending, finishing light welds and polishing hard to reach areas. This is the 3\" TWIST BLENDEX U Quick-Change Disc, 2SF. Priced per disc, sold by the box of 10.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade code:\u003c\/strong\u003e 2SF\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Silicon Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e TWIST quick-change\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 15,100 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04U321\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 10, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eVersatile , long lasting, superb finish\u003c\/li\u003e\n                \u003cli\u003eQuick-Change Twist  system makes changing discs easy and fast\u003c\/li\u003e\n                \u003cli\u003eEliminates downtime and maximizes productivity\u003c\/li\u003e\n                \u003cli\u003eNon loading, flexible\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 10.\u003c\/li\u003e\n                \u003cli\u003eTip: Use with TWIST backing pad\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eCleaning and restoring finishes\u003c\/li\u003e\n                \u003cli\u003eDeburring: for precisely removing burrs and sharp edges\u003c\/li\u003e\n                \u003cli\u003eFor very fine finishing and polishing applications\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49822560616686,"sku":"04U321","price":15.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04u321.jpg?v=1792620343"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/collections\/walter-13d304.jpg?v=1792619973","url":"https:\/\/eldoradotools.com\/es\/collections\/automotive-paint-rust-stripping.oembed?page=2","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}