{"title":"Aluminum \u0026 Non-Ferrous Carbide Burrs","description":"\u003cp\u003eAn aluminum cut carbide burr, also called non-ferrous or NF cut, has a few wide open flutes instead of the dozens of small crossed teeth on a double cut burr. Soft metal chips throw clear instead of welding into the tool, so the burr keeps cutting. Use it on aluminum, brass, bronze, copper, magnesium, zinc, carbon fiber and fiberglass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy not double cut?\u003c\/strong\u003e Aluminum melts at about 1,220°F. The heat of cutting softens the chip and it packs the small gaps of a double cut burr within seconds. The burr then rubs, heats up and stops cutting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePick a shape.\u003c\/strong\u003e SA cylinder for flats, edges and weld blending; SB end cut for square shoulders; SC ball nose for inside corners; SD ball and SE egg for hollows; SF tree for contours; SL cone for chamfers and tight angles. All 12 are Walter solid carbide on a 1\/4\" shank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRunning them.\u003c\/strong\u003e Light pressure, keep moving, and touch stick wax to the burr often. Never use an aluminum cut burr on steel or stainless, where the large teeth chip. Need several shapes? The \u003ca href=\"\/es\/collections\/carbide-burr-sets\"\u003ecarbide burr sets\u003c\/a\u003e include two aluminum cut sets.\u003c\/p\u003e\u003cp\u003eFree shipping on orders over $200, or call (833) 438-6657.\u003c\/p\u003e","products":[{"product_id":"01v003","title":"3\/8\" x 3\/4\" SA-3 Cylindrical Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SA-3: a 3\/8\" cylindrical head with a 3\/4\" length of cut on a 1\/4\" shank. Deburring and flat surface work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SA-3 — Cylindrical\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 66,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V003\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685411692782,"sku":"01V003","price":100.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v003_7a970a23-e8cd-45f4-86a8-6873253fc8cc.jpg?v=1791226991"},{"product_id":"01v008","title":"1\/2\" x 1\" SC-5 Cylindrical Ball Nose Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SC-5: a 1\/2\" cylindrical ball nose head with a 1\" length of cut on a 1\/4\" shank. Surface milling and contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SC-5 — Cylindrical Ball Nose\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V008\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685413986542,"sku":"01V008","price":174.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v008.jpg?v=1791226998"},{"product_id":"01v016","title":"1\/2\" x 1\" SF-5 Round Nose Tree Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SF-5: a 1\/2\" round nose tree head with a 1\" length of cut on a 1\/4\" shank. Narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SF-5 — Round Nose Tree\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V016\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685415297262,"sku":"01V016","price":157.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v016.jpg?v=1791227008"},{"product_id":"01v036","title":"3\/8\" x 1-1\/4\" SL-3 Cone, 14° Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SL-3: a 3\/8\" cone, 14° head with a 1-1\/4\" length of cut on a 1\/4\" shank. Surface machining and narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SL-3 — Cone, 14°\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 66,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V036\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685423194350,"sku":"01V036","price":100.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v036.jpg?v=1791227034"},{"product_id":"01v054","title":"1\/2\" x 1\" SA-5 Cylindrical Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SA-5: a 1\/2\" cylindrical head with a 1\" length of cut on a 1\/4\" shank. Deburring and flat surface work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SA-5 — Cylindrical\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V054\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685428601070,"sku":"01V054","price":63.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v054_0d476688-e066-43a4-8546-7ec3ceef36e3.jpg?v=1791227057"},{"product_id":"01v058","title":"3\/8\" x 3\/4\" SB-3 Cylindrical, End Cut Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SB-3: a 3\/8\" cylindrical, end cut head with a 3\/4\" length of cut on a 1\/4\" shank. Interior contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SB-3 — Cylindrical, End Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 66,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V058\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685430272238,"sku":"01V058","price":86.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v058_60845dc2-60b4-4756-a4b8-453a6aca9471.jpg?v=1791227062"},{"product_id":"01v060","title":"1\/4\" x 5\/8\" SC-1 Cylindrical Ball Nose Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SC-1: a 1\/4\" cylindrical ball nose head with a 5\/8\" length of cut on a 1\/4\" shank. Surface milling and contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SC-1 — Cylindrical Ball Nose\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 70,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V060\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685431058670,"sku":"01V060","price":39.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v060.jpg?v=1791227065"},{"product_id":"01v061","title":"3\/8\" x 3\/4\" SC-3 Cylindrical Ball Nose Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SC-3: a 3\/8\" cylindrical ball nose head with a 3\/4\" length of cut on a 1\/4\" shank. Surface milling and contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SC-3 — Cylindrical Ball Nose\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 66,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V061\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685431189742,"sku":"01V061","price":45.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v061.jpg?v=1791227066"},{"product_id":"01v063","title":"1\/2\" x 1\/2\" SD-5 Ball Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SD-5: a 1\/2\" ball head with a 1\/2\" length of cut on a 1\/4\" shank. Surface milling, deburring and contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SD-5 — Ball\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V063\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685431943406,"sku":"01V063","price":41.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v063.jpg?v=1791227069"},{"product_id":"01v064","title":"1\/2\" x 7\/8\" SE-5 Egg Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SE-5: a 1\/2\" egg head with a 7\/8\" length of cut on a 1\/4\" shank. Contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SE-5 — Egg\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V064\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685432205550,"sku":"01V064","price":54.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v064_1081513d-4778-4e11-b8da-fb6e7d098cec.jpg?v=1791227070"},{"product_id":"01v065","title":"3\/8\" x 3\/4\" SF-3 Round Nose Tree Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SF-3: a 3\/8\" round nose tree head with a 3\/4\" length of cut on a 1\/4\" shank. Narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SF-3 — Round Nose Tree\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 66,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V065\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685432533230,"sku":"01V065","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v065_d466637b-1d75-486a-bc8f-8ec2a42fcf35.jpg?v=1791227071"},{"product_id":"01v069","title":"1\/2\" x 1-1\/8\" SL-4 Cone, 14° Carbide Burr, Aluminum Cut","description":"\u003cp\u003eAluminum cut burrs have widely spaced, single-direction flutes with a lot of chip clearance, and that geometry is the whole difference. Soft metals smear and weld themselves into a standard burr until it stops cutting and starts rubbing; an open flute throws the chip clear and keeps cutting. Use these on aluminum, brass, copper, magnesium, zinc and carbon fibre. They will cut steel, but a double cut burr will do it better and last longer, so keep the two apart rather than treating one as a general-purpose tool. This is the SL-4: a 1\/2\" cone, 14° head with a 1-1\/8\" length of cut on a 1\/4\" shank. Surface machining and narrow contour work.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e SL-4 — Cone, 14°\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eBurr diameter:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eLength of cut:\u003c\/strong\u003e 1-1\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank diameter:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCut:\u003c\/strong\u003e Aluminum \/ Non-Ferrous Cut\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Tungsten Carbide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 50,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 01V069\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e China\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Each\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eOpen, single-direction flutes that shed soft-metal chips\u003c\/li\u003e\n                \u003cli\u003eResists loading and clogging on aluminum\u003c\/li\u003e\n                \u003cli\u003eSolid tungsten carbide head\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eDeburring aluminum and other soft metals\u003c\/li\u003e\n                \u003cli\u003eWeld blending on aluminum\u003c\/li\u003e\n                \u003cli\u003ePorting and shaping castings\u003c\/li\u003e\n                \u003cli\u003eWork where a standard burr loads up and stops cutting\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eBrass\u003c\/li\u003e\n                \u003cli\u003eCopper\u003c\/li\u003e\n                \u003cli\u003eMagnesium\u003c\/li\u003e\n                \u003cli\u003eZinc\u003c\/li\u003e\n                \u003cli\u003eCarbon Fiber\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n                \u003cli\u003eAir Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49685433975022,"sku":"01V069","price":65.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-01v069_b48d1623-0eca-43f8-9bfc-3a178d686b67.jpg?v=1791227077"}],"url":"https:\/\/eldoradotools.com\/es\/collections\/carbide-burrs-non-ferrous.oembed","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}