{"title":"Sanding Discs","description":"\u003cp\u003eWalter sanding discs for metal — resin fibre discs for angle grinders, hook and loop discs for finishing, and quick-change discs for die grinders, plus the backing pads they mount on. Aluminum oxide, zirconia alumina and ceramic grain in 24 through 180 grit.\u003c\/p\u003e","products":[{"product_id":"15v412","title":"4-1\/2\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 4-1\/2\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 7,400 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V412\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348139758,"sku":"15V412","price":2.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v412.jpg?v=1790879582"},{"product_id":"15v418","title":"4-1\/2\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 4-1\/2\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 7,400 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V418\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348172526,"sku":"15V418","price":2.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v418.jpg?v=1790879584"},{"product_id":"15v512","title":"5\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 5\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 6,150 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V512\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348270830,"sku":"15V512","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v512.jpg?v=1790879586"},{"product_id":"15v518","title":"5\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 5\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 6,150 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V518\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348303598,"sku":"15V518","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v518.jpg?v=1790879589"},{"product_id":"15v612","title":"6\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 6\" 120 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 5,100 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V612\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348369134,"sku":"15V612","price":3.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v612.jpg?v=1790879591"},{"product_id":"15v618","title":"6\" QUICK-STEP XX Hook \u0026 Loop Sanding Disc, 180 Grit","description":"\u003cp\u003eWalter QUICK-STEP XX is the finishing end of the range: a hook and loop ceramic disc in 120 and 180 grit only, so it is for blending and final surface work rather than removal. It uses the same Cyclone ceramic blend as COOLCUT XX with a cooling agent added. Because it backs onto a hook and loop pad rather than a rigid fibre arbor it will follow a curve — pair it with a QUICK-STEP interface pad and it conforms to radiused work a flat fibre disc skips over. Light pressure for the best finish, firmer pressure if you want it to cut. This is the 6\" 180 grit disc in ceramic with a hook and loop backing. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e Hook and loop\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 180\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 5,100 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15V618\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eCooling agent\u003c\/li\u003e\n                \u003cli\u003eExtra long life\u003c\/li\u003e\n                \u003cli\u003eSelf-sharpening premium grains\u003c\/li\u003e\n                \u003cli\u003eUltra High Removal Rate\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eBlending and final finishing\u003c\/li\u003e\n                \u003cli\u003eCurved and contoured surfaces with an interface pad\u003c\/li\u003e\n                \u003cli\u003eSurface preparation before coating\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348401902,"sku":"15V618","price":3.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15v618.jpg?v=1790879593"},{"product_id":"09d654","title":"1-1\/2\" x 1\/4\" SPINLOCK Ceramic Resin Fibre Disc, 40 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 1-1\/2\" 40 grit disc in ceramic, for a 1\/4\" arbor. Priced per disc, sold by the box of 100.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 40\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Ceramic\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D654\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Ireland\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 100, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 100.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348467438,"sku":"09D654","price":1.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d654.jpg?v=1790879595"},{"product_id":"09d102","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 24 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 24 grit disc in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 24\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D102\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672348696814,"sku":"09D102","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d102.jpg?v=1790879598"},{"product_id":"09d103","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 36 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 36 grit disc (coarse) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Coarse\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D103\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349450478,"sku":"09D103","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d103.jpg?v=1790879600"},{"product_id":"09d403","title":"2\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 36 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 36 grit disc (coarse) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Coarse\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D403\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349483246,"sku":"09D403","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d403.jpg?v=1790879602"},{"product_id":"09d105","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 50 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 50 grit disc in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D105\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349581550,"sku":"09D105","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d105.jpg?v=1790879604"},{"product_id":"09d106","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 60 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 60 grit disc (medium) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Medium\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D106\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349614318,"sku":"09D106","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d106.jpg?v=1790879606"},{"product_id":"09d406","title":"2\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 60 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 60 grit disc (medium) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Medium\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D406\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349647086,"sku":"09D406","price":1.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d406.jpg?v=1790879610"},{"product_id":"09d108","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 80 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 80 grit disc (fine) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D108\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349712622,"sku":"09D108","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d108.jpg?v=1790879611"},{"product_id":"09d408","title":"2\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 80 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 80 grit disc (fine) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D408\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349778158,"sku":"09D408","price":1.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d408.jpg?v=1790879614"},{"product_id":"09d112","title":"2\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 120 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 2\" 120 grit disc (extra fine) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Extra fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D112\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349810926,"sku":"09D112","price":0.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d112.jpg?v=1790879615"},{"product_id":"09d202","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 24 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 24 grit disc in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 24\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D202\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349876462,"sku":"09D202","price":1.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d202.jpg?v=1790879618"},{"product_id":"09d203","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 36 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 36 grit disc (coarse) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Coarse\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D203\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672349941998,"sku":"09D203","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d203.jpg?v=1790879620"},{"product_id":"09d503","title":"3\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 36 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 36 grit disc (coarse) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Coarse\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D503\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350040302,"sku":"09D503","price":1.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d503.jpg?v=1790879622"},{"product_id":"09d205","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 50 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 50 grit disc in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D205\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350073070,"sku":"09D205","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d205.jpg?v=1790879624"},{"product_id":"09d206","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 60 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 60 grit disc (medium) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Medium\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D206\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350105838,"sku":"09D206","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d206.jpg?v=1790879626"},{"product_id":"09d506","title":"3\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 60 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 60 grit disc (medium) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Medium\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D506\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350138606,"sku":"09D506","price":1.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d506.jpg?v=1790879629"},{"product_id":"09d208","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 80 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 80 grit disc (fine) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D208\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350204142,"sku":"09D208","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d208.jpg?v=1790879631"},{"product_id":"09d508","title":"3\" x 1\/4\" SPINLOCK Zirconia Alumina Resin Fibre Disc, 80 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 80 grit disc (fine) in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D508\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350236910,"sku":"09D508","price":1.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d508.jpg?v=1790879633"},{"product_id":"09d212","title":"3\" x 1\/4\" SPINLOCK Aluminum Oxide Resin Fibre Disc, 120 Grit","description":"\u003cp\u003eWalter SPINLOCK is the quick-change resin fibre disc for weld blending and finishing in tight quarters, and it comes in two grains so you can match it to the job: aluminum oxide for a finer, controlled finish and general cleanup, zirconia alumina where you want it to bite and move metal. Quick-change mounting — a twist on, a twist off, no tooling — which is the point when you are stepping through grits on one weld instead of grinding a flat panel. Grit ladder: 24–36 to take a weld down, 50–60 to blend it, 80–120 to finish. This is the 3\" 120 grit disc (extra fine) in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e Extra fine\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 09D212\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eFast removal, fine finish\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld blending in tight quarters\u003c\/li\u003e\n                \u003cli\u003eDeburring and edge cleanup\u003c\/li\u003e\n                \u003cli\u003eStepping through grits on a single weld\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350269678,"sku":"09D212","price":1.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-09d212.jpg?v=1790879635"},{"product_id":"04d203","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 36 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 36 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D203\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Ireland\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350302446,"sku":"04D203","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d203.jpg?v=1790879637"},{"product_id":"04d205","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 50 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 50 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D205\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350367982,"sku":"04D205","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d205.jpg?v=1790879639"},{"product_id":"04d206","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 60 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 60 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D206\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350564590,"sku":"04D206","price":1.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d206.jpg?v=1790879642"},{"product_id":"04d208","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 80 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 80 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D208\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Ireland\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350597358,"sku":"04D208","price":1.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d208.jpg?v=1790879644"},{"product_id":"04d210","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 100 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 100 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 100\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D210\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350761198,"sku":"04D210","price":1.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d210.jpg?v=1790879647"},{"product_id":"04d212","title":"2\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 2\" 120 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 30,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D212\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350859502,"sku":"04D212","price":1.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d212.jpg?v=1790879650"},{"product_id":"04d303","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 36 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 36 grit disc in aluminum oxide, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D303\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672350957806,"sku":"04D303","price":2.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d303.jpg?v=1790879652"},{"product_id":"04d305","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 50 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 50 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D305\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351023342,"sku":"04D305","price":2.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d305.jpg?v=1790879654"},{"product_id":"04d306","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 60 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 60 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D306\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351056110,"sku":"04D306","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d306.jpg?v=1790879656"},{"product_id":"04d308","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 80 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 80 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D308\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351088878,"sku":"04D308","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d308.jpg?v=1790879659"},{"product_id":"04d310","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 100 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 100 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 100\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D310\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351154414,"sku":"04D310","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d310.jpg?v=1790879660"},{"product_id":"04d312","title":"3\" x 1\/4\" TWIST TOPCUT Quick-Change Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter TWIST TOPCUT is the small-diameter quick-change disc: the same zirconia alumina grain as full-size TOPCUT on a 2\" or 3\" disc with a plastic TR button that twists onto a holder in about a second. It is built for the work a 4-1\/2\" grinder cannot reach — inside corners, weld roots, tube and handrail joints, anywhere you are working in a confined space with a die grinder. The backing is colour coded by grit, which sounds like a small thing until you have a bench full of loose discs and need the 80 rather than the 36. This is the 3\" 120 grit disc in zirconia alumina, for a 1\/4\" arbor. Priced per disc, sold by the box of 50.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Zirconia Alumina\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 28,000 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 04D312\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Canada\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 50, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eExcellent for working in confined places\u003c\/li\u003e\n                \u003cli\u003eExceptional performance, highest productivity\u003c\/li\u003e\n                \u003cli\u003eLong life\u003c\/li\u003e\n                \u003cli\u003ePlastic \"TR\" button for quick mounting\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 50.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eWeld root and inside corner work\u003c\/li\u003e\n                \u003cli\u003eTube, pipe and handrail joints\u003c\/li\u003e\n                \u003cli\u003eDeburring and finishing in confined spaces\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n                \u003cli\u003eStainless Steel\u003c\/li\u003e\n                \u003cli\u003eAluminum\u003c\/li\u003e\n                \u003cli\u003eNon-Ferrous Metals\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eDie Grinder\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351318254,"sku":"04D312","price":2.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-04d312.jpg?v=1790879663"},{"product_id":"15c452","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 24 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 24 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 24\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C452\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351351022,"sku":"15C452","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c452.jpg?v=1790879665"},{"product_id":"15c453","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 36 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 36 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,300 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C453\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351383790,"sku":"15C453","price":1.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c453.jpg?v=1790879668"},{"product_id":"15c454","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 40 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 40 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 40\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C454\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351416558,"sku":"15C454","price":1.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c454.jpg?v=1790879669"},{"product_id":"15c455","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 50 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 50 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,300 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C455\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351482094,"sku":"15C455","price":1.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c455.jpg?v=1790879671"},{"product_id":"15c456","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 60 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 60 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,300 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C456\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351514862,"sku":"15C456","price":1.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c456.jpg?v=1790879673"},{"product_id":"15c458","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 80 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 80 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 80\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C458\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351547630,"sku":"15C458","price":1.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c458.jpg?v=1790879676"},{"product_id":"15c460","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 100 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 100 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 100\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C460\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351645934,"sku":"15C460","price":1.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c460.jpg?v=1790879678"},{"product_id":"15c462","title":"4-1\/2\" x 7\/8\" COOLCUT Sanding Disc, 120 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 4-1\/2\" 120 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 120\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 13,300 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C462\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351678702,"sku":"15C462","price":1.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c462.jpg?v=1790879680"},{"product_id":"15c502","title":"5\" x 7\/8\" COOLCUT Sanding Disc, 24 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 5\" 24 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 24\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C502\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351711470,"sku":"15C502","price":1.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c502.jpg?v=1790879682"},{"product_id":"15c503","title":"5\" x 7\/8\" COOLCUT Sanding Disc, 36 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 5\" 36 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 36\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C503\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351744238,"sku":"15C503","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c503.jpg?v=1790879684"},{"product_id":"15c504","title":"5\" x 7\/8\" COOLCUT Sanding Disc, 40 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 5\" 40 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 40\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C504\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351809774,"sku":"15C504","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c504.jpg?v=1790879686"},{"product_id":"15c505","title":"5\" x 7\/8\" COOLCUT Sanding Disc, 50 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 5\" 50 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 50\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaximum speed:\u003c\/strong\u003e 12,200 RPM\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C505\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351842542,"sku":"15C505","price":1.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c505.jpg?v=1790879689"},{"product_id":"15c506","title":"5\" x 7\/8\" COOLCUT Sanding Disc, 60 Grit","description":"\u003cp\u003eWalter COOLCUT is the general-purpose resin fibre disc in the line: aluminum oxide grain on a heavy fibre backing, sized for a 7\/8\" arbor so it runs on any angle grinder or sander with a backing pad. It is the disc for everyday work on steel — knocking down light welds, cleaning mill scale, rust and paint, and general blending where you are not trying to move a lot of metal in a hurry. The grain is applied electrostatically, which stands the grit upright and keeps the cut cool rather than burnishing the surface. If cost per disc matters more than cycle time, start here; step up to TOPCUT or COOLCUT XX when you need the metal off faster. This is the 5\" 60 grit disc in aluminum oxide, for a 7\/8\" arbor. Priced per disc, sold by the box of 25.\u003c\/p\u003e\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrit:\u003c\/strong\u003e 60\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eGrain:\u003c\/strong\u003e Aluminum Oxide\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e Walter 15C506\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e Turkey\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Box of 25, priced per disc\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eAbrasive grains applied by electrostatic process\u003c\/li\u003e\n                \u003cli\u003eHigh quality fibre backing\u003c\/li\u003e\n                \u003cli\u003eHigh removal rate, cool cutting\u003c\/li\u003e\n                \u003cli\u003eProvide consistent quality finishes\u003c\/li\u003e\n                \u003cli\u003ePriced per disc, sold by the box of 25.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eApplications:\u003c\/h3\u003e\n                \u003cli\u003eLight weld removal on steel\u003c\/li\u003e\n                \u003cli\u003eRust, paint and mill scale removal\u003c\/li\u003e\n                \u003cli\u003eGeneral surface cleaning and blending\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eSteel\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eAngle Grinder\u003c\/li\u003e\n                \u003cli\u003eSander\/Polisher\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Walter","offers":[{"title":"Default Title","offer_id":49672351875310,"sku":"15C506","price":1.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/walter-15c506.jpg?v=1790879691"}],"url":"https:\/\/eldoradotools.com\/es\/collections\/sanding-discs.oembed","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}