{"title":"SDS-Plus Anchor \u0026 Concrete Screw Bits","description":"","products":[{"product_id":"stp-413","title":"1\/4\" SDS-Plus Stop Drill Bit for 3\/16\" Drop-In Anchors","description":"\u003ch2\u003e1\/4\" SDS-Plus Stop Drill Bit for 3\/16\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 1\/4\" SDS-Plus hammer bit with a stop lip that bottoms out at 11\/16\", the exact hole depth a 3\/16\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 11\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 3\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983120622,"sku":"STP-413","price":15.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-617","title":"3\/8\" SDS-Plus Stop Drill Bit for 1\/4\" Drop-In Anchors","description":"\u003ch2\u003e3\/8\" SDS-Plus Stop Drill Bit for 1\/4\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 3\/8\" SDS-Plus hammer bit with a stop lip that bottoms out at 1-1\/16\", the exact hole depth a 1\/4\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 1-1\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983251694,"sku":"STP-617","price":16.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-813","title":"1\/2\" SDS-Plus Stop Drill Bit for 3\/8\" Short Drop-In Anchors","description":"\u003ch2\u003e1\/2\" SDS-Plus Stop Drill Bit for 3\/8\" Short Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 1\/2\" SDS-Plus hammer bit with a stop lip that bottoms out at 13\/16\", the exact hole depth a 3\/8\" Short drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 13\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 3\/8\" Short\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983317230,"sku":"STP-813","price":18.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-827","title":"1\/2\" SDS-Plus Stop Drill Bit for 3\/8\" Drop-In Anchors","description":"\u003ch2\u003e1\/2\" SDS-Plus Stop Drill Bit for 3\/8\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 1\/2\" SDS-Plus hammer bit with a stop lip that bottoms out at 1-11\/16\", the exact hole depth a 3\/8\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 1-11\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 3\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983382766,"sku":"STP-827","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-1019","title":"5\/8\" SDS-Plus Stop Drill Bit for 1\/2\" Short Drop-In Anchors","description":"\u003ch2\u003e5\/8\" SDS-Plus Stop Drill Bit for 1\/2\" Short Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 5\/8\" SDS-Plus hammer bit with a stop lip that bottoms out at 1-3\/16\", the exact hole depth a 1\/2\" Short drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 1-3\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 1\/2\" Short\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983448302,"sku":"STP-1019","price":20.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-1033","title":"5\/8\" SDS-Plus Stop Drill Bit for 1\/2\" Drop-In Anchors","description":"\u003ch2\u003e5\/8\" SDS-Plus Stop Drill Bit for 1\/2\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 5\/8\" SDS-Plus hammer bit with a stop lip that bottoms out at 2-1\/16\", the exact hole depth a 1\/2\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 2-1\/16\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639983972590,"sku":"STP-1033","price":23.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-418","title":"7\/8\" SDS-Plus Stop Drill Bit for 5\/8\" Drop-In Anchors","description":"\u003ch2\u003e7\/8\" SDS-Plus Stop Drill Bit for 5\/8\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 7\/8\" SDS-Plus hammer bit with a stop lip that bottoms out at 2-5\/8\", the exact hole depth a 5\/8\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 7\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 2-5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639984234734,"sku":"STP-418","price":30.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"stp-419","title":"1\" SDS-Plus Stop Drill Bit for 3\/4\" Drop-In Anchors","description":"\u003ch2\u003e1\" SDS-Plus Stop Drill Bit for 3\/4\" Drop-In Anchors\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA 1\" SDS-Plus hammer bit with a stop lip that bottoms out at 3-1\/4\", the exact hole depth a 3\/4\" drop-in anchor needs. Drill until the lip touches the concrete and the hole is right: the anchor sits flush, the setting tool expands it properly, and the threaded rod pulls against the full cone.\u003c\/p\u003e\n\n\u003cp\u003eOverhead work is where that matters most. Hangers for pipe, duct, sprinkler line, strut and cable tray all land in a concrete deck, and a hole drilled too deep buries the anchor below the surface, while a shallow one stops the anchor short. The stop also keeps you from driving deeper than you need to, which is one less chance of hitting rebar. Carbide tipped, ANSI specification, sold individually.\u003c\/p\u003e\n\n\u003cp\u003eSetting hammer-in anchors on the same job? Use the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003eSDS-Plus nail-in anchor driver\u003c\/a\u003e. Running a big SDS-Max hammer overhead? The \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e takes these bits without a tool change.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill size:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrill depth (stop):\u003c\/strong\u003e 3-1\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFits drop-in anchor:\u003c\/strong\u003e 3\/4\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTip:\u003c\/strong\u003e Carbide tipped\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e ANSI specification\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eStop lip prevents over-drilling\u003c\/li\u003e\n                \u003cli\u003eDrills the exact depth a drop-in anchor needs\u003c\/li\u003e\n                \u003cli\u003eLess likely to hit rebar\u003c\/li\u003e\n                \u003cli\u003eCarbide tipped for concrete, stone, brick and masonry\u003c\/li\u003e\n                \u003cli\u003eANSI specification\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639984300270,"sku":"STP-419","price":35.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274150"},{"product_id":"sds-hd1","title":"1\/4\" x 9\" SDS-Plus Nail-In Anchor Driver","description":"\u003ch2\u003e1\/4\" x 9\" SDS-Plus Nail-In Anchor Driver\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eA spring-loaded SDS-Plus driver that sets 1\/4\" nail-in anchors with the rotary hammer you are already holding. The socket captures the anchor's nail head, the spring holds it square to the surface, and the hammer action drives it home in a second or two, without swinging a hand hammer overhead.\u003c\/p\u003e\n\n\u003cp\u003eNail-in anchors (also called hammer-drive or hammer-set anchors) are the fast way to hang conduit straps, junction boxes, cable clips and light strut on concrete, block and brick. At 9\" long this driver reaches into a deck or a joist space and keeps your knuckles away from the ceiling.\u003c\/p\u003e\n\n\u003cp\u003eDrilling for drop-in anchors as well? The \u003ca href=\"https:\/\/eldoradotools.com\/collections\/sds-plus-anchor-and-concrete-screw-bits\"\u003eSDS-Plus stop drill bits\u003c\/a\u003e drill the exact depth each anchor size needs. On a big machine, the \u003ca href=\"https:\/\/eldoradotools.com\/products\/725max001\"\u003eSDS-Max to SDS-Plus Adapter\u003c\/a\u003e lets this driver run in an SDS-Max hammer.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 1\/4\" x 9\"\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDrives:\u003c\/strong\u003e 1\/4\" nail-in anchors\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eShank:\u003c\/strong\u003e SDS-Plus\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eAction:\u003c\/strong\u003e Rotary hammer, hammer mode\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eSpring-loaded socket holds the anchor square\u003c\/li\u003e\n                \u003cli\u003eDrives anchors effortlessly with the hammer you already have\u003c\/li\u003e\n                \u003cli\u003e9\" reach for overhead work\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFor use on:\u003c\/h3\u003e\n                \u003cli\u003eConcrete\u003c\/li\u003e\n                \u003cli\u003eStone\u003c\/li\u003e\n                \u003cli\u003eBrick\u003c\/li\u003e\n                \u003cli\u003eMasonry\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Plus Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639984398574,"sku":"SDS-HD1","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-sds-hd1-nail-in-anchor-driver.jpg?v=1790274150"},{"product_id":"725max001","title":"SDS-Max to SDS-Plus Adapter","description":"\u003ch2\u003eSDS-Max to SDS-Plus Adapter\u003c\/h2\u003e\n\u003cp\u003eITM\u003c\/p\u003e\n\n\u003cp\u003eAn SDS-Max shank with an SDS-Plus chuck on the end, so the heavy hammer already in your hands takes SDS-Plus bits. Hang a run of anchors overhead with a big machine and you no longer stop to swap tools, or carry a second hammer up the lift just for the small holes.\u003c\/p\u003e\n\n\u003cp\u003eAn SDS-Max hammer hits far harder than an SDS-Plus bit is built for, so keep to the smaller diameters, let the tool do the work, and expect bits to wear faster than they would in an SDS-Plus hammer.\u003c\/p\u003e\n\n\u003cp\u003ePairs with the \u003ca href=\"https:\/\/eldoradotools.com\/collections\/sds-plus-anchor-and-concrete-screw-bits\"\u003eSDS-Plus stop drill bits\u003c\/a\u003e for drop-in anchor holes and the \u003ca href=\"https:\/\/eldoradotools.com\/products\/sds-hd1\"\u003enail-in anchor driver\u003c\/a\u003e.\u003c\/p\u003e\n\n\n\u003cdiv class=\"infomiddle\"\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMachine end:\u003c\/strong\u003e SDS-Max shank\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eTool end:\u003c\/strong\u003e SDS-Plus chuck\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e SDS-Plus bits in an SDS-Max rotary hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n                \u003cli\u003eKeeps one machine on the job for large and small holes\u003c\/li\u003e\n                \u003cli\u003eAccepts any SDS-Plus bit, chisel or driver\u003c\/li\u003e\n                \u003cli\u003eSold individually\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cul id=\"dccheck\"\u003e\n\u003ch3\u003eRuns in:\u003c\/h3\u003e\n                \u003cli\u003eSDS-Max Rotary Hammer\u003c\/li\u003e\n        \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ITM","offers":[{"title":"Default Title","offer_id":49639984496878,"sku":"725MAX001","price":75.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/files\/itm-725max001-sds-max-to-sds-plus-adapter.jpg?v=1790274150"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0091\/7769\/4268\/collections\/itm-stp-sds-plus-stop-drill-bit.jpg?v=1790274272","url":"https:\/\/eldoradotools.com\/es\/collections\/sds-plus-anchor-and-concrete-screw-bits.oembed","provider":"Eldorado Tools Inc","version":"1.0","type":"link"}