About This Item:
These Heavy Duty Rotary Hammer Core Bits are used with SDS-Max electric rotary hammer machines. The special alloy steel body and Tungsten Carbide withstand continuous hammering. A pilot drill bit and extension are required.
- Size: 5" Core Bit
- # Teeth: 12
- 4” OAL / Taper
- Part # 719CB0125
Specifications:
- Wipe off oil or lubricant from the taper of the extension and the inner taper of the core bit.
- Insert the pilot drill into the drive extension first.
- Insert the drive extension into the core bit.
- Start drilling the hole until the core bit is 3/8” deep.
- Use the ejector key to push out the pilot drill.
- Continue drilling the hole until the material being drilled fills the core bit interior. Approximately 3” deep.
- Break the drilled material inside the core bit with a chisel (if necessary.)
- Return to Step 6 until desired hole depth is achieved.
Instructions:
About This Item:
Notice: Core Bit drilling without the use of a pilot drill bit causes excessive pressure on the taper shank system. This can result in breakage to the extension at the tapered end, especially between the two slots. Such jagged breaks are not considered defective and may not be covered under warranty.
If you’re in need of parts that are not listed in our Spring 2019 Glaziers’ Catalog, let us know. We carry a wide range of tools from machining and aerospace, to general contracting and demolition.
Prices Subject to ChangeThese prices are good from October 1st, 2020 to December 30th, 2020. That said, understand that our prices are subject to change at anytime, without notice. We do our best to inform customers of impending price changes but sometimes they come quickly and unexpectedly.
Return PolicyYou may return most new, unopened items within 30 days of delivery for a full refund. We’ll pay the return shipping cost if the item(s) being returned is a result of our error (i.e. you received an incorrect or defective item, etc.). All items must be returned with a tracking number in the original packaging and with the original packing materials—including the packing slips, and container or sleeves. Once we have received the item(s), we will inspect them for the reason(s) they are being returned, and notify you of receipt and refund following inspection. All refunds will be by check.
Proposition 65 WarningYou can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm.
Privacy PolicyYour private information resides on secure servers and is only used for transactional purposes. We will not share it or use ot for marketing purposes, outside of any newsletters you have signed up to receive.
