ITM
2-9/16" (65.1 mm) Bi-Metal Variable Pitch Hole Saw
275HW0034
$14.88$25.62/ea · 2 or more
In stock
Hole Saws
Products170
BrandITM
Quick answer
ITM hole saws in three families: bi-metal for wood, plastic and thin metal, carbide grit for tile and other hard material, carbide tipped for tough cutting. Sizes from 9/16" up to 6-7/8", plus arbors and kits.
ITM
100mm (100.0 mm) Bi-Metal Variable Pitch Hole Saw
275HW0100
$27.82$47.92/ea · 2 or more
In stock
ITM
2-1/8" (53.9 mm) Bi-Metal Variable Pitch Hole Saw
275HW0029
$13.73$23.64/ea · 4 or more
In stock
ITM
1-7/16" (36.5 mm) Bi-Metal Variable Pitch Hole Saw
275HW0123
$8.94$15.39/ea · 4 or more
In stock
ITM
2-1/16" (52.4 mm) Bi-Metal Variable Pitch Hole Saw
275HW0128
$13.73$23.64/ea · 4 or more
In stock
ITM
2-3/8" (60.3 mm) Bi-Metal Variable Pitch Hole Saw
275HW0032
$14.03$24.16/ea · 4 or more
In stock
Choosing a hole saw
A hole saw cuts a clean round hole by removing only the ring, so it drills large openings faster than a spade bit or a twist drill. This range is all ITM and splits into three families by cutting edge: bi-metal, carbide grit and carbide tipped.
Bi-metal saws are the everyday choice for wood, plastic and thin metal. Carbide grit saws have an abrasive edge instead of teeth and handle hard, abrasive material. Carbide tipped saws are for tougher work where a bi-metal edge would dull quickly. Arbors, extensions and an electrician's kit round it out.
Drilling tips
Start with a steady, slow speed and let the saw seat before you lean on it. Keep the drill square, back out now and then to clear the slug, and use cutting oil on metal. Wet cutting keeps carbide grit saws cool. Pick the family first, then the size, using the bi-metal range for general jobs.
Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.
Wood, plastic & thin metalBi-metal variable pitch saws
The general-purpose family, in fractional and metric sizes from 9/16" up to 5-1/2" and beyond.See the range →Tile, brick & abrasive materialCarbide grit hole saws
An abrasive edge for hard material. Sizes from 3/4" up, including a 6-3/8" recessed lighting saw.See the range →Tough, high-wear cuttingCarbide tipped hole saws
Carbide teeth that hold an edge where bi-metal wears out fast. Sizes from 1-3/8" to 5-3/4" and up.See the range →Reach & setupArbors, extensions and kits
12" arbor extensions in 3/8" and 7/16" hex, and an electrician's hole saw kit.See the range →
Common questions
Which hole saw should I buy for general work?
Bi-metal. It handles wood, plastic and thin metal and comes in the widest range of sizes here. Move to carbide grit for hard, abrasive material, or carbide tipped when bi-metal wears out too fast.
Do I need an arbor?
Yes. The arbor holds the hole saw in the drill and carries the pilot bit. The arbors, extensions and kit are in the arbors and kits group.
Can I use a hole saw in a hammer drill?
Use rotation only. Hammer action is meant for masonry bits and will shake a hole saw, chip the teeth and wear out the arbor.
Buying for a crew?
Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.