Free shipping over $200 · Supplying commercial contractors across the continental U.S.

HomeMetal y maderaEjercicios de campana y flexión

Bellhanger & Flex Drills HSS Bellhangers

Products40
BrandsITM and Tru-Cut
Quick answer

Stiff-shank bellhangers from ITM and Tru-Cut, mostly HSS, 3/16" to 5/8" in diameter and 12" to 48" long. Eight are carbide-tipped for masonry.

40 results
1 2 Siguiente »

Choosing an HSS bellhanger

These are stiff-shank bellhangers for drilling straight through studs, plates and joists. There are 40 items, 32 from ITM and 8 from Tru-Cut. Most are high speed steel, and a few are carbon steel. Sizes run from 3/16" x 12" up to 3/8" x 48", 1/2" x 42" and 5/8" x 18", with shanks of 3/16", 1/4", 5/16", 3/8" or 1/2".

Drilling tips

Run at moderate speed with steady, light pressure. A long bit that is forced will heat up and bend. Keep the drill square to the work, and pull the bit out every few inches to clear chips. Check the shank in the title (for example "w/3/8" shank") against your chuck size before ordering.

Eight of the 40 are carbide-tipped for masonry. Use them as the product page directs, and keep the plain HSS bits for framing. If you want a bit that resists abrasive material for longer, see the carbide-tipped bellhangers.

Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.

Everyday framing workHSS bellhangers 12" to 48" Stiff-shank bits from 3/16" up to 5/8" in diameter, in lengths such as 12", 18", 24" and 36".
Masonry in the pathCarbide-tipped for masonry Eight bits in this collection carry a carbide tip for masonry. Check the title and product page.
Longer edge lifeCarbide-tipped bellhangers ITM bits with a carbide tip, 1/4" to 3/4" diameter.See the range →

Common questions

What sizes are in this collection?

Diameters include 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8", in lengths from 12" to 48", including 18", 24", 30", 36" and 42". Not every diameter comes in every length.

Are all of them HSS?

Most are high speed steel. Six are listed as carbon steel, and eight are carbide-tipped HSS for masonry. The title and product page state the material.

Which shank do I need?

Shanks run 3/16", 1/4", 5/16", 3/8" and 1/2". The title shows it, for example "w/3/8" shank". Pick one that fits your chuck.

Know-how for Bellhanger & Flex Drills HSS Bellhangers

All guides →
Twist drill bit above a freshly drilled hole with wood shavings Types of Drill Bits Explained: Which Bit for Which Material13 min read

Buying for a crew?

Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.

Contact UsCall 833-438-6657

Comparar /3