Free shipping over $200 · Supplying commercial contractors across the continental U.S.

HomeMetal y madera

Conjuntos

Products11
BrandsITM, Titan, Triumph and Tru-Cut
Quick answer

Drill bit sets and kits from ITM, Triumph and Tru-Cut: HSS fractional, number and letter sets, carbide-tip sets for masonry and hard steel, glass and tile sets, and hole saw and drill-tap kits.

11 results

Choosing a drill bit set

A set keeps the common sizes in one case so a crew does not stop work for a missing bit. The range covers ITM, Triumph and Tru-Cut: 115-piece high-speed steel sets, 29-piece ThunderBit+ sets with 3-flat shanks, 5-piece carbide-tip sets, 4-piece glass and tile sets, an electrician's hole saw kit and an 8-piece 3 in 1 drill tap kit.

Picking the right set

The 115-piece HSS sets cover 1/16" to 1/2" by 64ths, plus #1 to #60 and A to Z, in bright or black oxide. For masonry, the 5-piece multi-purpose carbide-tip set runs 1/8" to 3/8". Hard steel sets come in right-hand and left-hand versions.

Match the drive to the bit. Glass and tile sets are rotation only. Multi-purpose carbide bits run in rotation on tile and can take hammer in masonry. Metal bits want a steady feed and cutting oil. For glass sets, see Quad Spear glass bits.

Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.

General metal drillingHSS sets, fractional, number, letter 115-piece 118° sets in bright or black oxide, and 29-piece ThunderBit+ sets with 3-flat shanks.See the range →Brick, block and tileMulti-purpose carbide-tip set 5-piece set from 1/8" to 3/8" for tile and masonry.See the range →Glass and tileQuad Spear glass and tile sets 4-piece sets in 3/16" to 3/8" or 1/4" to 1/2". Rotation only.See the range →Electrical and tapping workHole saw and drill-tap kits An electrician's hole saw kit and an 8-piece 3 in 1 HD drill tap kit.See the range →

Common questions

Which drill bit set covers the most sizes?

The 115-piece HSS sets. They run 1/16" to 1/2" by 64ths, plus number sizes #1 to #60 and letter sizes A to Z, in bright or black oxide finish.

Can I use the glass and tile sets in a hammer drill?

No. Glass bits are rotation only. Hammer action cracks glass and tile and damages the tip. Use a standard drill, or a rotary hammer switched to drill-only mode.

Are the carbide-tip sets right-hand only?

No. The 5-piece hard steel carbide-tip sets come in a right-hand set and a left-hand set, both 1/8" to 3/8". The multi-purpose set is a separate 5-piece masonry set in the same size range.

Buying for a crew?

Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.

Contact UsCall 833-438-6657

Comparar /3