Tru-Cut
Broca de pala de 3/4" x 16" (paquete de 5)
WB.75016
$5.65$12.95/ea · sold in 5s, from 10
In stock
HomeMetal y maderaBrocas de pala
Spade Drill Bits Long 16"
Products18
BrandsITM and Tru-Cut
Quick answer
Long 16" spade bits from Tru-Cut and ITM for reaching through deeper framing in wood. Diameters from 1/4" to 1-3/8", with several listed for electricians.
Tru-Cut
Broca de pala de 3/8" x 16" (paquete de 5)
WB.37516
$4.50$10.33/ea · sold in 5s, from 10
In stock
Tru-Cut
Broca de pala de 7/16" x 16" (paquete de 5)
WB.43716
$4.55$10.44/ea · sold in 5s, from 10
In stock
Tru-Cut
Broca de pala de 9/16" x 16" (paquete de 5)
WB.56216
$5.29$12.14/ea · sold in 5s, from 10
In stock
Tru-Cut
Broca de pala de 5/8" x 16" (paquete de 5)
WB.62516
$5.41$12.41/ea · sold in 5s, from 10
In stock
Tru-Cut
Broca de pala de 1/4" x 16" (paquete de 5)
WB.25016
$4.38$10.04/ea · sold in 5s, from 10
In stock
Tru-Cut
Broca de pala de 1/2" x 16" (paquete de 5)
WB.50016
$5.28$12.12/ea · sold in 5s, from 10
In stock
Choosing a long spade bit
The long spade bits are the same flat-blade design as the standard bits on a 16" length. They reach through multiple studs, plates or joists without an extension. Diameters run from 1/4" to 1-3/8", and the range includes both Tru-Cut and ITM, with some listed for electricians.
Drilling tips
Seat the centre point at low speed, then run faster with light pressure. On a long bit, keep the drill square to the work, because a bit this long will wander and whip if you lean on it. Pull it back regularly to clear chips, and finish from the far side if you want a clean exit.
Keep these bits out of nails and screws. If you only need to get through one stud or plate, the standard 6" bits are easier to control.
Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.
Deep runs through framing16" spade bits, Tru-Cut
Ten Tru-Cut bits in the 16" series for holes through several framing members.
Electricians' cable pulls16" spade bits, ITM
Eight ITM sizes in the long series, each listed for electricians.
Only one stud or plateStandard 6" spade bits
Shorter, stiffer and easier to control when you do not need the extra length.See the range →Common questions
How long are these spade bits?
All bits in this collection are 16" long. Diameters run from 1/4" up to 1-3/8".
Why does a long spade bit wander?
A longer bit flexes more. Keep the drill square to the work, use light pressure and start slowly so the centre point seats before you speed up.
Which brands are in the long series?
Tru-Cut and ITM. The two brands cover the same 16" length across most of the same diameters.
Know-how for Spade Drill Bits Long 16"
All guides →
Buying for a crew?
Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.