Free shipping over $200 · Supplying commercial contractors across the continental U.S.

Free shipping over $200

Construction Reamer Sizes: Bolt Hole to Car or Bridge Reamer

HomeBlog & GuidesGuidesFoundation & Basement Repair

Construction Reamer Sizes: Bolt Hole to Car or Bridge Reamer

Find the construction reamer for every structural bolt hole: standard and oversized sizes, how far off holes can be, 3-flat or hex, and prices.

Tools10 in this guide
Read13 min
UpdatedNov 19, 2026

Quick answer: Size a construction reamer to the hole on the drawings, not to the bolt. Up to 7/8 in., a structural bolt's standard hole is 1/16 in. bigger than the bolt, so a 3/4 in. bolt takes a 13/16 in. reamer: the CRF-5264 ($74.55) in a 1/2 in. drill, or the CHX-5264 hex car reamer ($71.16) on an impact wrench. It starts only if its point fits through both holes, which for 13/16 in. means holes up to 11/32 in. out of line.

The beam is hung, the clip is tight, and the bolt won't go through. Two holes that should line up are off by a hair or by a quarter inch. This guide is the size chart for that moment: which reamer opens which bolt hole, which one will actually start in the gap you have, what you turn it with, and what it costs.

Crews call these tools a lot of things: construction reamer, car reamer, bridge reamer, aligning reamer, hex reamer or just "the reamer." They all have a long tapered point that finds its way into two misaligned holes, a left-hand spiral and a right-hand cut. Every reamer below is made by ITM, sold one at a time and priced per piece.

What size construction reamer do I need for my bolt?

A construction reamer should match the standard hole for your bolt: the bolt diameter plus 1/16 in. for 1/2 to 7/8 in. bolts, and plus 1/8 in. for 1 in. bolts and larger (RCSC Specification for Structural Joints, 2020, Table 3.1). Find your bolt in the first column and read across to the reamer that fits your drill and your budget.

Bolt Standard hole = reamer size Value car reamer, 3-flat (CRF) Value hex car reamer (CHX) Value hex bridge reamer (CBB) USA car reamer, 3-flat (ASF) USA fast spiral car reamer, 3-flat (AFC) USA hex car reamer (ACX)
1/2 in. 9/16 in. CRF-3664, $47.76 – – ASF-3664, $90.29 AFC-3664, $99.34 –
5/8 in. 11/16 in. CRF-4464, $60.96 CHX-4464, $66.05 CBB-4464, $79.67 ASF-4464, $109.54 AFC-4464, $121.10 ACX-4464, $128.55
3/4 in. 13/16 in. CRF-5264, $74.55 CHX-5264, $71.16 CBB-5264, $100.67 ASF-5264, $134.68 AFC-5264, $148.28 ACX-5264, $154.08
7/8 in. 15/16 in. CRF-6064, $93.36 CHX-6064, $84.59 CBB-6064, $119.66 ASF-6064, $148.44 AFC-6064, $163.92 ACX-6064, $174.34
1 in. 1-1/8 in. Not stocked – – – – –
1-1/8 in. 1-1/4 in. – – – ASF-8064, $272.09 AFC-8064, $299.30 –

Hole sizes from the RCSC 2020 Specification, Table 3.1. Reamer sizes and shanks from ITM's 2026 catalog, pp. 42–43. Prices are per reamer, checked on eldoradotools.com on Nov 18, 2026.

The 1 in. bolt is the one that trips people up. The current standard hole is 1-1/8 in., but older drawings often show 1-1/16 in. We sell 1-1/16 in. reamers (CHX-6864, $109.83, and CRF-6864, $114.58) for those older jobs. We do not stock a 1-1/8 in. construction reamer, and ITM doesn't make one in these lines, so call us before you order a size the table marks "Not stocked."

Is it a standard hole or an oversized hole?

Ream to the hole type on the drawings. A standard hole reamed one size up becomes an oversized hole, and RCSC treats any hole bigger than its table size as the next larger hole type. Oversized holes are allowed in slip-critical joints with the Engineer of Record's approval, and not in snug-tight or pretensioned joints that carry shear (RCSC 2020, Section 3.3.2). If the drawings already call for oversized holes, this is the reamer for each bolt:

Bolt Oversized hole = reamer size Reamers we sell in that size
1/2 in. 5/8 in. CRF-4064, $52.70 · ASF-4064, $98.55 · AFC-4064, $108.83
5/8 in. 13/16 in. CRF-5264, $74.55 · CHX-5264, $71.16 · CBB-5264, $100.67 · ASF-5264, $134.68 · AFC-5264, $148.28 · ACX-5264, $154.08
3/4 in. 15/16 in. CRF-6064, $93.36 · CHX-6064, $84.59 · CBB-6064, $119.66 · ASF-6064, $148.44 · AFC-6064, $163.92 · ACX-6064, $174.34
7/8 in. 1-1/16 in. CRF-6864, $114.58 · CHX-6864, $109.83 · CBB-6864, $162.86 · ACX-6864, $228.28
1 in. 1-1/4 in. ASF-8064, $272.09 · AFC-8064, $299.30
1-1/8 in. 1-7/16 in. Not stocked. Call us.

Oversized hole sizes from RCSC 2020, Table 3.1. Prices checked Nov 18, 2026.

Slotted holes are a different story. A reamer cuts a round hole, so it can't make a slot or clean one up. Short and long slots need their own tooling and the engineer's sign-off where RCSC requires it.

How far out of line can the holes be before the reamer won't start?

A construction reamer starts only if its point fits through the opening the two holes leave between them. When both holes are the reamer's size, that opening is the hole size minus the offset, so the most a reamer can handle is its size minus its point diameter. A 13/16 in. reamer has a 0.468 in. point, so it starts in holes up to 0.344 in. (11/32 in.) out of line.

Reamer size Point diameter Max offset it starts in In fractions
3/8 in. 0.250 in. 0.125 in. about 1/8 in.
1/2 in. 0.281 in. 0.219 in. about 7/32 in.
9/16 in. 0.343 in. 0.219 in. about 7/32 in.
5/8 in. 0.343 in. 0.282 in. about 9/32 in.
11/16 in. 0.375 in. 0.312 in. about 5/16 in.
3/4 in. 0.406 in. 0.344 in. about 11/32 in.
13/16 in. 0.468 in. 0.344 in. about 11/32 in.
7/8 in. 0.500 in. 0.375 in. about 3/8 in.
15/16 in. 0.585 in. 0.353 in. about 11/32 in.
1 in. 0.594 in. 0.406 in. about 25/64 in.
1-1/16 in. 0.807 in. 0.255 in. about 1/4 in.
1-1/4 in. 0.719 in. 0.531 in. about 33/64 in.

Point diameters from ITM's 2026 catalog, pp. 42–43. The max offset is our arithmetic from those points and assumes both holes are already the reamer's size; smaller punched holes leave a smaller opening.

How to read the chart: find your reamer size along the bottom; the lower line is how far apart the two hole centers can be before the point won't start. What it means for you: the 13/16 in. reamer for a 3/4 in. bolt starts in holes up to 11/32 in. out of line, and the 1-1/16 in. reamer forgives less than the 15/16 in.

The bigger reamer is not always the more forgiving one. The 1-1/16 in. reamer has a 0.807 in. point, so it starts in holes only 0.255 in. apart, less than the 15/16 in. reamer handles. When the holes are farther off than the table allows, pull the plates closer with a drift pin or spud wrench, or drill a pilot through both plates at least as big as the point, then ream.

"Before you order a reamer, look through the joint. If the opening between the two holes is smaller than the reamer's point, it won't start, no matter how hard you push. Pin the steel closer first, then ream to the size on the drawings, not one bigger."

David Castro, President, Eldorado Tools

3-flat or hex shank: what will turn the reamer?

Pick the shank for the tool in your hands. ITM marks its 3-flat reamers for a 1/2 in. drill and its hex reamers for an impact wrench. A 3-flat shank goes in a 1/2 in. drill chuck or a mag drill with a chuck. A hex shank takes an impact socket.

Shank What turns it Lines Sizes we sell
3/8 or 1/2 in. 3-flat 1/2 in. drill, mag drill with a chuck CRF, ASF, AFC 3/8 to 1-1/4 in.
Hex nut Impact wrench with an impact socket CHX, ACX, CBB 11/16 to 1-1/16 in.

Each hex reamer's hex is the same size as the heavy hex head and nut on the bolt it was sized for. The 13/16 in. hex reamer has a 1-1/4 in. hex, and a 3/4 in. structural bolt takes a 1-1/4 in. socket, so the socket already on your impact turns both.

Reamer size Hex (socket size) Same socket as this bolt Hex reamers we sell
11/16 in. 1-1/16 in. 5/8 in. CHX-4464, $66.05 · CBB-4464, $79.67 · ACX-4464, $128.55
13/16 in. 1-1/4 in. 3/4 in. CHX-5264, $71.16 · CBB-5264, $100.67 · ACX-5264, $154.08
15/16 in. 1-7/16 in. 7/8 in. CHX-6064, $84.59 · CBB-6064, $119.66 · ACX-6064, $174.34
1-1/16 in. 1-5/8 in. 1 in. CHX-6864, $109.83 · CBB-6864, $162.86 · ACX-6864, $228.28

Hex sizes from ITM's 2026 catalog, pp. 42–43. Heavy hex widths from RCSC 2020, Table C-2.1 (ASME B18.2.6). Prices checked Nov 18, 2026.

Car reamer or bridge reamer: how much steel are you going through?

A bridge reamer has a longer flute than a car reamer, so pick the bridge reamer when the stack of steel is thick and the car reamer when space is tight. At 13/16 in., ITM's hex bridge reamer has a 7-3/8 in. flute on a 9-3/8 in. tool, and its car reamers have a 5 in. flute on a 7 to 7-1/4 in. tool.

13/16 in. reamer Shank Flute length Overall length Price
CRF-5264 car reamer 1/2 in. 3-flat 5 in. 7-1/4 in. $74.55
ASF-5264 car reamer (USA) 1/2 in. 3-flat 5 in. 7-1/4 in. $134.68
AFC-5264 fast spiral car reamer (USA) 1/2 in. 3-flat 5 in. 7-1/4 in. $148.28
CHX-5264 hex car reamer 1-1/4 in. hex 5 in. 7 in. $71.16
ACX-5264 hex car reamer (USA) 1-1/4 in. hex 5 in. 7 in. $154.08
CBB-5264 hex bridge reamer 1-1/4 in. hex 7-3/8 in. 9-3/8 in. $100.67

Lengths from ITM's 2026 catalog, pp. 42–43. Prices checked Nov 18, 2026.

Part of every flute is the starting taper, so the length that cuts at full size is shorter than the flute. ITM doesn't publish the taper length. That means we can't give you an exact thickness cutoff yet. When the stack is thick, take the bridge reamer, or call us with the thickness. Our bridge reamers come only with a hex shank, in 11/16 to 1-1/16 in.

Value or USA-made: which reamer line should I buy?

All six lines are ITM, M2 high-speed steel, with a tapered point, a left-hand spiral and a right-hand cut. The value lines (CRF, CHX, CBB) are made in Europe, and the USA lines (ASF, AFC, ACX) cost about twice as much at the same size. At 13/16 in., the USA car reamer costs $60.13 more than the value one.

Reamer size Value car, 3-flat (CRF) Value hex car (CHX) Value hex bridge (CBB) USA car, 3-flat (ASF) USA hex car (ACX)
3/8 in. $35.15 – – $71.24 –
1/2 in. – – – $84.84 –
9/16 in. $47.76 – – $90.29 –
5/8 in. $52.70 – – $98.55 –
11/16 in. $60.96 $66.05 $79.67 $109.54 $128.55
3/4 in. $70.31 – – $131.42 –
13/16 in. $74.55 $71.16 $100.67 $134.68 $154.08
7/8 in. $83.58 – – $148.44 –
15/16 in. $93.36 $84.59 $119.66 $148.44 $174.34
1 in. $98.96 – – $174.15 –
1-1/16 in. $114.58 $109.83 $162.86 – $228.28
1-1/4 in. – – – $272.09 –

Prices per reamer on eldoradotools.com, Nov 18, 2026. The USA fast spiral line (AFC) runs $7 to $27 above the ASF at each size; see the size chart above.

How to read the chart: find your reamer size along the bottom and read up to each line's price per reamer. What it means for you: at 13/16 in., the value hex car reamer (CHX) is the cheapest at $71.16, and the USA-made lines cost about twice as much.

Buy the value line for a job that needs a few holes cleaned up. Buy USA-made when the job specs domestic tools or the reamer will ride on the truck every day. ITM's fast spiral (AFC) is its USA car reamer with a faster spiral, in the same sizes and lengths as the ASF.

Where does a reamer fit in foundation and basement steel?

A construction reamer fits the bolted steel in foundation work: clip angles, beam-to-post and beam-to-column connections, and embed plates drilled for standard bolt holes. It does not fit anchor-rod base plates. AISC recommends holes of 1-5/16 in. for a 3/4 in. anchor rod and bigger for larger rods (AISC Design Guide 1, Table 2.3), and our largest reamer is 1-1/4 in.

For the rest of the foundation crew's kit, see our foundation repair tools guide.

How do you run a construction reamer?

Run a construction reamer slowly, with steady pressure, with the joint pinned so the plates can't shift. Bolt or pin the connection in the holes next to the one you're reaming, check that the gap is within the offset table above, then feed the point in and let the taper pull the holes round. Our What Is a Reamer? guide has starting speeds and a troubleshooting table, and the drill speed chart explains why heat ruins a cutting edge.

Cleaning up the edge after you ream? See our guide to the deburring tool for metal.

Construction reamer FAQ

What size reamer for a 3/4 in. bolt?

A 13/16 in. reamer for a standard hole. If the drawings call for an oversized hole, it's 15/16 in. Oversized holes need the engineer's approval, and RCSC allows them in slip-critical joints, not in bearing joints that carry shear.

What size reamer for a 1 in. bolt?

The current standard hole is 1-1/8 in., and we don't stock that size. Older drawings often show 1-1/16 in., which we do carry, such as CHX-6864 ($109.83).

What socket fits a hex shank reamer?

The socket that fits the bolt the reamer was sized for: 1-1/16 in. for the 11/16 in. reamer, 1-1/4 in. for 13/16 in., 1-7/16 in. for 15/16 in. and 1-5/8 in. for 1-1/16 in. Use an impact socket.

What is the difference between a car reamer and a bridge reamer?

Length. At 13/16 in., our hex bridge reamer has a 7-3/8 in. flute and the car reamers have a 5 in. flute. The bridge reamer reaches through thicker stacks; the car reamer fits tighter spots.

Will a 13/16 in. reamer start if the holes are 3/8 in. apart?

No. Its 0.468 in. point needs at least that much opening, so it starts only in holes up to 0.344 in. out of line. Drift the plates closer or drill a pilot through both first.

Can I ream a hole bigger than the drawings show?

Only with the Engineer of Record's OK. A hole bigger than the standard size counts as an oversized hole, which RCSC allows in slip-critical joints and tension-only joints, not in bearing joints that carry shear.

Can a reamer make a slotted hole?

No. A reamer cuts a round hole. Slots need other tooling and, in most joints, the engineer's approval.

Not sure which reamer fits? Call our team at (833) 4-ETOOLS or email sales@eldoradotools.com with the bolt size, the hole type on the drawings and what you'll turn it with, and we'll name the part.

Shop all car and construction reamers and bridge reamers. Drilling the holes first? See How to Choose Drill Bits for Metal.

Sources: RCSC Specification for Structural Joints Using High-Strength Bolts (2020), Table 3.1 (hole sizes), Section 3.3 (where oversized and slotted holes are allowed) and Table C-2.1 (heavy hex widths, per ASME B18.2.6); ITM 2026 catalog, pp. 42–43 (reamer sizes, points, flute and overall lengths, shanks, drive and origin); AISC Design Guide 1, Table 2.3, as reprinted in AISC Engineering Journal, 2024 Q2 (anchor-rod holes). Prices from eldoradotools.com on Nov 18, 2026.

← Back to Blog & Guides
Vanessa Franchesca
Written by Vanessa Franchesca

Vanessa Franchesca is a highly skilled professional with a passion for policy, marketing, and digital strategy. With a proven track record of success, she has excelled in developing and implementing effective campaigns. Vanessa's expertise lies in policy development, social media management, content creation, and brand development. Her strong analytical skills and creativity allow her to deliver impactful results for her clients. With a Bachelor's degree in Social Sciences from Harvard University’s Extension School with a concentration in Government, and years of experience in the industry, Vanessa is dedicated to driving growth and helping businesses and people thrive in the digital landscape. Connect with her on LinkedIn to explore new opportunities and stay updated on the latest marketing trends.