Free shipping over $200 · Supplying commercial contractors across the continental U.S.
Free shipping over $200
Nothing in the menu matches that search. The search bar above looks through every product.
Puertas de ducha289 products
Electricistas302 products
Climatización363 products
Plomería341 products
Metal Fabrication & Welding1,096 products
Foundation & Basement Repair653 products
Data Center Construction1,050 products
Automotive & Collision Repair1,186 products
Don’t see your trade? Call 833-438-6657 — we’ll put a list together.
Which drop in anchor drill bit fits your rod: bit size and stop depth for 1/4 to 3/4 in. drop-ins, checked against four anchor makers, wi...
Concrete Core Drill Bit: Wet, Dry, Diamond, Carbide, SDS-MaxGuide · Electrical
Masonry Drill Bits: Slow Spiral, Cyclo Twist or Hammer-RatedGuide · Electrical
Long Carbide Burrs and Mini Burrs for Pipe, Tanks and PortsGuide · Metal Fabrication
Single Cut vs Double Cut Carbide Burrs: Which Cut for Steel?Guide · Metal Fabrication
Carbide Burr Shapes Chart: Match Head to Cut (SA to SN)Guide · Metal Fabrication
Deburring Tool for Metal: 82° vs 90°, Flutes, and Hole SizeGuide · Glass & Shower
1/2" x 1" SC-5 Cylindrical Ball Nose Carbide Burr, Double Cut, 6" Long está agotado y se enviará tan pronto como vuelva a estar disponible.
1/2" x 1" SC-5 Cylindrical Ball Nose Carbide Burr, Double...
1/2" x 1" SC-5 Cylindrical Ball Nose Carbide Burr, Double Cut, 6" Long está agotado y se enviará tan pronto como vuelva a estar disponible.
The same 01V double cut heads on a 6" shank, for work you cannot otherwise reach — deep cavities, the inside of tube and vessel, down inside a weld prep, anywhere the grinder body would hit the job before the burr did. The long shank is the whole point and it is also the thing to respect: a 6" burr flexes, so its maximum speed is half that of the same head on a standard shank, and published speed charts recommend running it about 25% slower than a standard burr. Start it against the work, never in open air, and keep the feed light and steady — let the flutes cut rather than pushing the shank into a bow. This is the SC-5: a 1/2" cylindrical ball nose head with a 1" length of cut on a 1/4" shank, on the 6" long series shank. Surface milling and contour work.
Flat $15 shipping until then.
Why crews buy here
Premium bits, blades and abrasives, sold in the quantities a crew actually uses.
We supply commercial contractors across the continental United States with premium, top-tier cutting tools, in bulk. That saves you money and makes purchasing easy.
Orders ship from manufacturer distribution centers across the U.S., so the bits get to the job, not just to a warehouse.
Your foreman, your purchaser and your branches share one account.
Open a contractor account and stop putting bits on a personal card.
Fair pricing, with the per-piece price shown on the page.
Tell other crews how the tool worked on the job.
Free shipping over $200 applies in the continental U.S.; oversized items may vary.
Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.
The same 01V double cut heads on a 6" shank, for work you cannot otherwise reach — deep cavities, the inside of tube and vessel, down inside a weld prep, anywhere the grinder body would hit the job before the burr did. The long shank is the whole point and it is also the thing to respect: a 6" burr flexes, so its maximum speed is half that of the same head on a standard shank, and published speed charts recommend running it about 25% slower than a standard burr. Start it against the work, never in open air, and keep the feed light and steady — let the flutes cut rather than pushing the shank into a bow. This is the SC-5: a 1/2" cylindrical ball nose head with a 1" length of cut on a 1/4" shank, on the 6" long series shank. Surface milling and contour work.
