Free shipping over $200 · Supplying commercial contractors across the continental U.S.

HomeAbrasivesBy Power Tool

Wheels for Angle Grinders

Products51
BrandsITM and Walter
Quick answer

Grinding wheels, flap discs, cut-off wheels and diamond blades that fit an angle grinder, in sizes from 4" to 9". Walter for metal, ITM diamond blades for masonry.

51 results
« Anterior 1 2 3

Matching a wheel to a grinder

Angle grinders do more jobs than any other hand tool, and the wheel decides which one. This collection gathers everything in the range made for them: Walter grinding wheels, ALLSTEEL TURBO flap discs and COMBO ZIP cut-off wheels for metal, plus ITM diamond blades for masonry and tile.

Sizes and fit

Start with the grinder. Wheel diameter has to stay within what the guard and the grinder are rated for, and the arbor must match: 7/8" plain holes and 5/8"-11 threaded hubs both appear here, in 4", 4-1/2", 5", 6", 7" and 9".

Hold the grinder with both hands, keep the guard between you and the wheel, and never exceed the maximum speed marked on the wheel. For blending welds and finishing stainless, reach for a flap disc; for heavy stock removal use a grinding wheel.

Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.

Heavy stock removalGrinding wheels Walter HP XX in Type 27, 27S and Type 28, with 1/8" and 1/4" thicknesses.See the range →Blending welds, finishingFlap discs ALLSTEEL TURBO in 40, 60 and 80 grit. Listed as stainless safe.See the range →Cutting masonry and tileDiamond blades ITM turbo, segmented and tuck point blades in 4" to 7" for the grinder.See the range →Cutting metalCut-off wheels COMBO ZIP cut and deburr wheels, 5/64" thick, in three sizes.See the range →

Common questions

What size wheel fits my grinder?

Use the size your guard and grinder are rated for, never larger. This range runs 4", 4-1/2", 5", 6", 7" and 9". Also check the arbor, since some wheels have a 7/8" hole and others a 5/8"-11 thread.

Which wheels are listed as stainless safe?

The ALLSTEEL TURBO flap discs and the COMBO ZIP cut-off wheels carry the stainless safe listing, so they suit stainless as well as steel.

Can an angle grinder cut tile or brick?

Yes, with a diamond blade. The ITM diamond blades for grinders run 4" to 7" and are listed for wet or dry cutting. Keep the cut shallow on each pass and wear dust protection.

Buying for a crew?

Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.

Contact UsCall 833-438-6657

Comparar /3