Free shipping over $200 · Supplying commercial contractors across the continental U.S.

HomePor especialidadPuertas de ducha

Avellanadores para azulejos

Products4
BrandITM
Quick answer

ITM diamond countersinks for tile that bevel the top of a drilled hole. Four sizes, from 3/16" and 1/4" holes up to 3", used by shower door and tile installers.

4 results

Countersinking tile holes

3/16" and 1/4" hardware holesCountersink for 3/16" & 1/4" holes Sized for the small anchor holes drilled for shower door hardware.
Holes up to 1-3/8"Countersink 3/16" to 1-3/8" One bit that covers a wide range of small and mid-size holes.
Larger openings, 1" to 3"Countersinks 1" to 3" Two larger bits, 1" to 1-7/8" and 1-7/8" to 3".
Drilling the hole firstTile drill bits V-Groove, diamond core and multi-purpose bits to drill the hole before you countersink.See the range →

Common questions

What is a countersink for in tile?

It cuts a bevel around a drilled hole so a screw head or hardware seats cleanly and the sharp glazed edge is removed. You drill the hole first, then countersink the top.

Do I use water with a diamond countersink?

Yes. Diamond tooling runs cooler and lasts longer wet, and water carries away the slurry. Use rotation only with light pressure, and stop when the bevel is the size you need.

How do these mount in my drill?

Three have a 5/8"-11 threaded mount and need a matching arbor or adapter. One has a 1/4" hex impact shank that goes straight into a 1/4" hex chuck or impact driver.

Buying for a crew?

Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.

Contact UsCall 833-438-6657

Comparar /3