Free shipping over $200 · Supplying commercial contractors across the continental U.S.

Home

Abrasive Wheels

Products56
BrandsITM and Walter
Quick answer

Grinding wheels, flap discs, cut-off wheels and diamond blades, mostly for angle grinders. Walter abrasives handle metal, and ITM diamond blades handle masonry, tile and stone, including 10-packs.

56 results
1 2 3 Siguiente »

Choosing an abrasive wheel

Most of this range runs on an angle grinder. Walter supplies the metalworking side: HP XX grinding wheels, ALLSTEEL TURBO flap discs and COMBO ZIP cut and deburr wheels, many of them stainless safe. ITM supplies the diamond blades, from 4" grinder wheels up to 14" blades for cut-off and walk-behind saws.

Picking and using a wheel

Match the wheel to the job. Grinding wheels remove stock, flap discs grind and blend in one step, cut-off wheels slice, and diamond blades cut masonry, tile and stone. Check the arbor too: the range includes 7/8" holes and 5/8"-11 threaded hubs.

Never run a wheel faster than the speed printed on it, keep the guard in place, and let the wheel do the cutting instead of leaning on the grinder. The diamond blades are listed for wet or dry cutting, and water keeps them cooler and cuts down dust. Not sure which way to go on masonry? Start with the diamond blades.

Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.

Stock removal on steelGrinding wheels Walter HP XX wheels in Type 27, Type 27S and Type 28 saucer styles, from 4-1/2" to 9".See the range →Blending and finishingFlap discs Walter ALLSTEEL TURBO discs in 40, 60 and 80 grit, 4-1/2", 5" and 6".See the range →Masonry, tile and stoneDiamond blades ITM turbo and segmented blades from 4" to 14", with 10-packs in the smaller sizes.See the range →Thin cuts in metalCut-off wheels Walter COMBO ZIP cut and deburr wheels, 5/64" thick, in 4-1/2", 5" and 6".See the range →

Common questions

What is the difference between Type 27 and Type 28?

Both have a raised center so the nut sits clear of the work. Type 27 wheels are flat; Type 28 wheels are saucer-shaped. The Type 28 wheels here are Walter HP XX saucer grinding wheels in 7" and 9".

Can I grind with a cut-off wheel?

No. Thin cutting wheels are built for load along the edge and can break under side pressure. Use a grinding wheel or flap disc for stock removal. COMBO ZIP wheels are sold for cutting and deburring.

Are the diamond blades wet or dry?

Every diamond blade in this range is listed for wet or dry cutting. Water keeps the blade cooler and controls dust, so it is the better choice on long cuts.

Buying for a crew?

Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.

Contact UsCall 833-438-6657

Comparar /3