Weldon
Avellanador de 82º - Tamaño de tornillo de 5/16" (10 piezas)CS10-1
$25.00$27.50/ea · 10 or more
In stockMetal Fabrication & Welding
Products856
Brands5 brands
Quick answer
Drill bits, taps, end mills, countersinks, step drills and abrasive wheels for drilling, threading, milling and grinding metal. Triumph, Titan, Weldon, Walter and ITM, sold by the box or pack.
Walter
2-3/8" Crimped Wire Mounted Cup Brush, 1/4" Shank, .0118" Carbon Steel13C018
$18.60/ea · 2 or more
In stock
Titan
Fresa de extremo de carburo de aluminio de 3/4" x 3" con 3 ranuras cuadradasTC63520
$97.75/ea
18 in stock
Titan
Fresa de extremo de aluminio cuadrada de 2 ranuras de 3/8" x 2-1/2"TC62724
$65.85/ea
7 in stock
Walter
7" x 1/4" x 5/8"-11 HP XX Saucer Grinding Wheel, Type 2808K706
$23.43/ea · sold in 10s
1520 in stock
Walter
2" x 1/4" SPINLOCK Aluminum Oxide Resin Fibre Disc, 50 Grit09D105
$0.98/ea · sold in 25s
In stock
Triumph
Macho de roscar de flauta recta 8-32 NC (paquete de 12)071043
$7.37$18.42/ea · sold in 12s
In stock
Triumph
Macho de roscar con flauta recta 6-40 NF (paquete de 12)071092
$7.37$18.42/ea · sold in 12s
In stock
Walter
3" x 5/8"-11 Knot-Twisted Wire Cup Brush, .020" Carbon Steel, 20 mm Trim13F354
$23.52/ea · 2 or more
In stock
Walter
1/2" x 1/4" SK-5 90° Countersink Carbide Burr, Double Cut01V068
$22.11/ea · 2 or more
In stock
Choosing metalworking tools
Fabricators and welders need tools that cut clean and last through a shift. This collection covers 455 items: Triumph HSS drill bits and taps, Titan end mills for aluminum, Weldon countersinks, Walter abrasive wheels for angle grinders, and ITM step drills and combo drill taps.
Drilling and tapping tips
Use cutting oil on steel and run slower as the diameter goes up. Start larger holes with a pilot hole. Tap with cutting fluid and back the tap out every turn or so to break the chip. For end mills in aluminum, use lubricant so chips do not weld to the flutes.
On a grinder, check that the wheel's rated speed matches the tool, and keep the guard in place. Eighteen items here are tagged Stainless Safe, so look for that tag when the job is stainless.
Free shipping on orders over $200. Trade accounts can reorder in a click from My Toolbox, or call (833) 438-6657.
Everyday holes in metalJobber length HSS drills
Triumph HSS jobber drills, many in black oxide, sold by the box in small sizes.See the range →Big holes, 1/2" chuckSilver & Deming drills
1/2" reduced 3-flat shanks so larger-diameter bits fit a 1/2" chuck without slipping.See the range →Threading holesFractional taps
ThunderTap fractional taps in plug, taper and bottoming styles.See the range →Milling aluminumSquare end mills
Titan end mills for aluminum in 2- and 3-flute styles. Corner radius styles are also listed.See the range →
Common questions
What is a Silver & Deming drill?
A Silver & Deming drill has a reduced shank so a large-diameter bit fits a standard chuck. The ones here have a 1/2" reduced 3-flat shank, which resists slipping under load.
What end mills do you have for aluminum?
Titan end mills made for aluminum: 54 square end and 49 corner radius, in 2-flute and 3-flute styles. Use lubricant so aluminum does not load up the flutes.
Which tools are suited to stainless steel?
Look for items tagged Stainless Safe, 18 in this collection. On stainless, run slower with cutting oil and keep steady pressure so the bit does not work-harden the surface.
Buying for a crew?
Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.