Free shipping over $200 · Supplying commercial contractors across the continental U.S.

Free shipping over $200

Security Torx Bits: Pin Torx, Spanner and Tri-Wing Sizes

HomeBlog & GuidesGuidesElectrical

Security Torx Bits: Pin Torx, Spanner and Tri-Wing Sizes

Which security bit opens which tamper-proof screw: security Torx, spanner, pin hex, Tri-Wing and Phillips tamper, with sizes, makers' specs and prices.

Tools8 in this guide
Read0 min
UpdatedNov 20, 2026

Quick answer: Security Torx bits have a hole drilled in the tip so they seat over the post in the middle of a tamper-resistant Torx screw. Read the T number off the screw, or size it from the chart below, and buy that T number with a pin hole. The ITM TT-025-20 (T20 x 1 in.) is $1.00 a bit, min. 50. Two holes instead of a star? That's a spanner screw, and it takes a spanner bit.

The screw on the exit sign has a little post in the middle. Your T20 bit skates right off it. A security screw is built for that moment: it stops anyone without the matching bit. Once you know what you're looking at, the matching bit costs about a dollar.

This guide sorts security bits by what you see in the screw head, then by size. It names the exact ITM bit for each and says plainly where a maker doesn't print a size. Every bit here is S2 modified steel, heat treated to Rc 58–62, 1 in. long on a 1/4 in. hex shank, except T45–T55, which are 1-1/4 in. on a 5/16 in. hex (ITM 2026 catalog, p. 113).

Which security bit fits this screw?

Look straight down at the head and match the recess to a row. The names in the second column are what other catalogs and crews call the same thing.

What you see Also called Bit sizes we sell Example bit Price each Min.
Six-lobe star with a post in the center Security Torx, pin Torx, tamper-resistant Torx, Torx TR, star tamper T8–T40, T45–T55 TT-025-25 T25 $1.00 50
Hex hole with a post in the center Pin hex, security hex, tamper hex, pin Allen 3/32–5/16 in. TH-25-532 5/32 in. $1.14 50
Two round holes Spanner, snake-eye, pig-nose, drilled spanner #6–#14 SP-025-08 #8 $1.17 50
Three slots that don't meet in the middle Tri-Wing #1–#3 TRI-25-02 #2 $1.30 50
Phillips cross with a post in the center Phillips tamper, pin Phillips #2, #3 TP-025-02 #2 $2.18 25
Star with no post Torx, star T6–T55 TX-025-25 T25 $0.49 75
Slot with two sloped sides One-way, clutch-head one-way No bit removes it — — —

Prices from eldoradotools.com on Nov 20, 2026, per piece. "Min." is the order minimum; you pay the per-piece price for each.

A plain bit won't turn a pin screw. Wera's own description of its pin Torx bits says the screw "cannot be operated with 'normal' TORX® tools." That's the whole point of the post.

What size security Torx bit do I need?

The T number names the star, with or without a post. If the T number is on the screw box or the fixture's parts list, buy that size. If all you know is the screw size, ITM's chart gives the T number by screw and head:

Screw Pan head Flat (countersunk) head Socket head cap screw
#4 T9 T8 T10
#6 T15 T10 T15
#8 T20 T15 T25
#10 T25 T20 T27
#12 T27 T25 T27
1/4 in. T30 T27 T30
5/16 in. — T40 T45
3/8 in. T45 T40 T50

Source: ITM 2026 catalog, p. 108. "—" means ITM's chart has no entry. A screw maker's own sheet wins over this chart.

Here is every security Torx bit we sell:

Size Bit Length Shank Price each Min.
T8 TT-025-08 1 in. 1/4 in. hex $1.00 50
T9 TT-025-09 1 in. 1/4 in. hex $1.00 50
T10 TT-025-10 1 in. 1/4 in. hex $1.00 50
T15 TT-025-15 1 in. 1/4 in. hex $1.00 50
T20 TT-025-20 1 in. 1/4 in. hex $1.00 50
T25 TT-025-25 1 in. 1/4 in. hex $1.00 50
T27 TT-025-27 1 in. 1/4 in. hex $1.00 50
T30 TT-025-30 1 in. 1/4 in. hex $1.00 50
T40 TT-025-40 1 in. 1/4 in. hex $1.00 50
T45 TT-032-45 1-1/4 in. 5/16 in. hex $2.08 25
T50 TT-032-50 1-1/4 in. 5/16 in. hex $2.08 25
T55 TT-032-55 1-1/4 in. 5/16 in. hex $2.08 25

Prices from eldoradotools.com on Nov 20, 2026, per piece. Sizes, lengths and shanks: ITM 2026 catalog, p. 113.

Two things trip people up. First, T45 to T55 have a 5/16 in. hex shank. They won't go in a 1/4 in. impact chuck or a standard bit holder. Second, ITM doesn't make a T6 or T7 security bit, so neither do we.

Does a security Torx bit work on a regular Torx screw?

It fits, because the hole in the tip only clears a post that isn't there. But for plain Torx screws, buy the plain bit. It has a solid tip, and it costs half as much: $0.49 for a TX-025-25 against $1.00 for the pin version. Keep the pin bits for the screws that need them.

Going the other way doesn't work. A solid Torx bit hits the post and never reaches the bottom of the recess.

Electricians: which bit opens tamper-proof wallplates and vandal-resistant fixtures?

Schools, hospitals, jails, parking garages and public restrooms all spec security screws on the things people like to pull apart. Here is what the makers print:

Where you find it What the maker prints Our bit
Hubbell stainless wallplate screws (SSTP58) Spanner head, 6-32 x 5/8 in., stainless; uses Hubbell's SSTPD driver A spanner bit. Hubbell doesn't print the bit size; see the next section
Pass & Seymour wallplate screws (531S, 532S) Spanner oval head, 6-32 thread, 1/2 in. and 1 in. long A spanner bit. P&S doesn't print the bit size
Leviton tamper-resistant wallplate screws (84000-T) Spanner head; size not printed A spanner bit
Lithonia VR1 vandal-resistant fixture lens Stainless tamper-resistant Torx T-20 (Lithonia's own bit is "for tamper-resistant screws with center reject pin") TT-025-20 T20, $1.00, min. 50

Sources: Hubbell SSTP58 and SSTPD spec sheets; Pass & Seymour catalog page P-37; Leviton 84000-T product page; Lithonia VR1 spec sheet, p. 1. Other fixture brands vary. Check the fixture's spec sheet or parts list for the screw.

One name clash to clear up. A "tamper-resistant" (TR) receptacle has spring-loaded shutters in the slots, the kind NEC 406.12 calls for. It has nothing to do with security screws, and it doesn't need a special bit.

What do spanner bit numbers mean?

Our spanner bits run #6, #8, #10, #12 and #14, and fastener sellers list spanner screws by the same numbers. The catch is that the gap between the two holes isn't standardized. One large industrial catalog lists two different hole spacings for the same "#6" bit. The two prongs on a spanner bit also have to land square in the holes, or they slip.

So before you buy 50, check one. Set the bit on the screw and look at the prongs: both should drop in to the bottom with no rocking. If you have a screw in hand and aren't sure, call us and we'll help match it.

Bit Size Price each Min.
SP-025-06 #6 $1.17 50
SP-025-08 #8 $1.17 50
SP-025-10 #10 $1.17 50
SP-025-12 #12 $1.17 50
SP-025-14 #14 $1.17 50

Prices from eldoradotools.com on Nov 20, 2026, per piece. All 1 in. long on a 1/4 in. hex (ITM 2026 catalog, p. 113). We don't stock a #4.

"Before you order 50 spanner bits, put one on the screw. Spanner hole spacing isn't the same from one screw maker to the next, and a bit that rocks in the holes will chew up a stainless wallplate screw on the first turn."

David Castro, President, Eldorado Tools

What size pin hex bit fits a button head security screw?

A pin hex bit is sized like an Allen key: by the distance across the flats. For plain button head socket screws, the key size by screw is set by ASME B18.3. Pin versions from most makers use the same key, but check the screw maker's sheet.

Button head screw Hex key (in.) Our pin hex bit
#6 5/64 We don't sell 5/64
#8 3/32 TH-25-332
#10 1/8 TH-25-018
1/4 in. 5/32 TH-25-532
5/16 in. 3/16 TH-25-316
3/8 in. 7/32 TH-25-732
1/2 in. 5/16 TH-25-516

Key sizes for plain button head socket screws: Unbrako catalog, p. 15 (ASME B18.3). Every TH bit is $1.14, min. 50 (eldoradotools.com, Nov 20, 2026). We also sell 9/64 in. (TH-25-964) and 1/4 in. (TH-25-014).

What about Tri-Wing and Phillips tamper screws?

Tri-Wing is a Phillips Screw Company drive with three slots that don't meet in the middle. Phillips Screw Company sells it as tamper resistant: it "requires correct mating driver." The drive comes in sizes 0 through 15. We sell the three you're most likely to need: #1, #2 and #3, $1.30 each, min. 50.

A Phillips tamper screw is a Phillips cross with a post. We sell #2 and #3 pin Phillips bits at $2.18 each, min. 25.

What does a security bit cost?

A security Torx bit costs twice what a plain Torx bit does. The other security drives cost a little more, and the big T45–T55 and Phillips tamper bits cost about twice as much again:

Bit Price per bit ($)
Torx 0.49
Pin Torx 1.00
Pin hex 1.14
Spanner 1.17
Tri-Wing 1.30
Pin T45+ 2.08
Ph. pin 2.18

Price per bit from eldoradotools.com on Nov 20, 2026. "Torx" = plain TX-025, 1 in. "Pin T45+" = T45–T55. "Ph. pin" = Phillips tamper.

The minimum on most of these is 50 of one size, which comes to $50 to $65. That's a box per size for the van, with spares for the next person who walks off with one.

Why does a security bit snap or strip?

What happens Likely cause Fix
Bit won't seat at all Plain bit on a pin screw, or the wrong drive Match the recess to the first table
Star bit spins in the screw One size small (T20 in a T25) Go up a size; it should drop in with no play
Spanner bit rocks or slips Prong spacing doesn't match the screw Check the fit on one screw before buying a box
Tip twists or snaps on a stuck screw The hole in a pin bit leaves less steel in the tip Break the screw loose by hand first, then drive
Bit can't reach the screw Screw sits down a hole in the housing Use a magnetic holder for reach (below)

ITM doesn't publish an impact rating for its tamper bits. If a screw is seized, take the first turn by hand. Driving a lot of plain screws with an impact? Our impact vs regular bit tips guide covers that.

How do I reach a recessed security screw?

All of these are 1 in. insert bits, so they need a holder. A magnetic holder also buys you reach, as long as it fits down the hole:

Holder Overall length Price each Min.
BH-075-RC 3 in. $3.97 10
BH-100-RC 4 in. $6.51 6
BH-150-RC 6 in. $12.48 4

Prices from eldoradotools.com on Nov 20, 2026. These holders take 1/4 in. hex bits only, so not T45–T55.

FAQ

What are security Torx bits?

Torx bits with a hole drilled in the tip. The hole clears the post in the center of a tamper-resistant Torx screw. We sell T8 to T55.

Can I remove a security Torx screw without the bit?

Not cleanly. A plain Torx bit hits the post. The matching pin bit is $1.00, so it's cheaper than drilling out a screw on a finished install.

What is a snake-eye bit?

Another name for a spanner bit: a forked tip with two prongs that fit the two holes in the screw. We sell #6 to #14.

Is a Torx TR bit the same as a security Torx bit?

Yes. TR stands for tamper resistant. ITM calls the same bit "Star Tamper."

How do I remove a one-way screw?

No bit will. One-way screws are made to tighten with a flat blade and slip when you turn them the other way. We don't sell a removal tool for them.

Do you sell T6 or T7 security bits?

No. ITM's security Torx line starts at T8. We sell plain T6 and T7 Torx bits.

What size bit for a 6-32 tamper-proof wallplate screw?

Those screws are spanner head, per Hubbell and Pass & Seymour, but neither prints the bit size. Check one of our spanner bits on the screw before you buy a box, or call us with the screw in hand.

Shop all security and tamper-proof bits, Torx bits and bit tip holders. For every other screw head, see screw head types.

Sources: ITM 2026 catalog, p. 108 (Torx sizing chart) and p. 113 (tamper proof security bits: sizes, lengths, shanks, S2 modified steel, Rc 58–62); Wera 867/4 Z TORX BO bit page; Phillips Screw Company Tri-Wing page; Hubbell SSTP58 and SSTPD spec sheets; Pass & Seymour catalog page P-37; Leviton 84000-T product page; Lithonia VR1 spec sheet; Unbrako catalog p. 15 (ASME B18.3); NEC 406.12. Prices from eldoradotools.com on Nov 20, 2026. First drafted Nov 20, 2026.

← Back to Blog & Guides
Vanessa Franchesca
Written by Vanessa Franchesca

Vanessa Franchesca is a highly skilled professional with a passion for policy, marketing, and digital strategy. With a proven track record of success, she has excelled in developing and implementing effective campaigns. Vanessa's expertise lies in policy development, social media management, content creation, and brand development. Her strong analytical skills and creativity allow her to deliver impactful results for her clients. With a Bachelor's degree in Social Sciences from Harvard University’s Extension School with a concentration in Government, and years of experience in the industry, Vanessa is dedicated to driving growth and helping businesses and people thrive in the digital landscape. Connect with her on LinkedIn to explore new opportunities and stay updated on the latest marketing trends.