Free shipping over $200 · Supplying commercial contractors across the continental U.S.

Free shipping over $200

SDS Max Drill Bits: Lengths and Sizes for Anchors and Walls

HomeBlog & GuidesGuidesElectrical

SDS Max Drill Bits: Lengths and Sizes for Anchors and Walls

Read the three numbers on an SDS Max drill bit, pick the length that clears your wall, start deep holes the way ITM does, and know the freight before you order.

Tools16 in this guide
Read15 min
UpdatedNov 17, 2026

Quick answer: SDS Max drill bits are sold by three numbers: diameter, drilling depth and overall length. Buy by the middle one. A 1 x 31 x 36 in. bit (SMTE3601, $163.59) drills 31 in. deep, so it clears a 30 in. footing. A 13 in. bit drills 8 in., enough for anchor holes. The longest one-piece bits drill 47 in. Past that, use an X-Tendr extension (1-1/4 in. holes and up). Start a long hole with a short bit of the same size.

SMTE3601 · 1 x 31 x 36 in. That label tells you everything. The first number is the hole. The middle number is how deep the bit drills. The last is the whole bit, shank included. Buy by the last number and the bit comes up 5 in. short.

People call these SDS Max drill bits, SDS-Max hammer bits, rotary hammer bits, SDS Max concrete bits and 4-cutter bits. They fit any rotary hammer with an SDS-Max chuck: Bosch, Hilti, Milwaukee, DeWalt, Makita and the rest. This guide covers the solid bits we sell, ITM's X-Cutter line from 3/8 to 2 in., and the tunnel bore drills from 1-3/4 to 3-1/8 in. Still choosing between shanks? Start with SDS Plus vs SDS Max.

What do the three numbers on an SDS Max drill bit mean?

SMTE5258 · 5/8 x 47 x 52 in. An SDS Max drill bit is labeled diameter x drilling depth x overall length. On every ITM X-Cutter, the drilling depth is the overall length minus 5 in. Those 5 in. are the shank and the plain neck behind the flutes. They don't drill. So a 13 in. bit drills 8 in., a 36 in. bit drills 31 in., and a 52 in. bit drills 47 in.

Buy by the drilling depth. It has to be at least as deep as the hole, or as thick as the wall you're going through. Here is every X-Cutter we sell. Find your diameter, then pick the shortest bit that drills deep enough.

Size Drilling depth (in.) Overall (in.) Part Price Ships
3/8 in. 8 13 SMTE1338 $41.82 Standard
1/2 in. 8 13 SMTE1312 $41.99 Standard
1/2 in. 12 17 SMTE1712 $50.62 Standard
1/2 in. 16 21 SMTE2212 $53.42 Standard
9/16 in. 8 13 SMTE1391 $57.05 Standard
9/16 in. 16 21 SMTE2192 $74.48 Standard
5/8 in. 8 13 SMTE1358 $48.80 Standard
5/8 in. 12 17 SMTE1758 $55.52 Standard
5/8 in. 16 21 SMTE2258 $59.00 Standard
5/8 in. 31 36 SMTE3658 $111.41 Oversize tube, $39 per order
5/8 in. 47 52 SMTE5258 $142.12 Oversize tube, $99 per order
11/16 in. 16 21 SMTE2111 $81.44 Standard
3/4 in. 8 13 SMTE1334 $50.59 Standard
3/4 in. 12 17 SMTE1734 $59.93 Standard
3/4 in. 16 21 SMTE2234 $65.97 Standard
3/4 in. 31 36 SMTE3634 $116.56 Oversize tube, $39 per order
3/4 in. 47 52 SMTE5234 $151.06 Oversize tube, $99 per order
13/16 in. 16 21 SMTE2113 $86.55 Standard
7/8 in. 8 13 SMTE1378 $59.57 Standard
7/8 in. 12 17 SMTE1778 $68.28 Standard
7/8 in. 16 21 SMTE2278 $72.00 Standard
7/8 in. 31 36 SMTE3678 $161.64 Oversize tube, $39 per order
7/8 in. 47 52 SMTE5278 $192.29 Oversize tube, $99 per order
1 in. 8 13 SMTE1301 $65.17 Standard
1 in. 12 17 SMTE1701 $75.28 Standard
1 in. 16 21 SMTE2201 $79.14 Standard
1 in. 31 36 SMTE3601 $163.59 Oversize tube, $39 per order
1 in. 47 52 SMTE5201 $202.99 Oversize tube, $99 per order
1-1/16 in. 18 23 SMTE2311 $112.34 Standard
1-1/8 in. 12 17 SMTE1718 $94.74 Standard
1-1/8 in. 18 23 SMTE2218 $102.22 Standard
1-1/8 in. 31 36 SMTE3618 $177.31 Oversize tube, $39 per order
1-1/4 in. 10 15 SMTE1714 $106.09 Standard
1-1/4 in. 18 23 SMTE2214 $119.90 Standard
1-1/4 in. 31 36 SMTE3614 $204.51 Oversize tube, $39 per order
1-1/4 in. 47 52 SMTE5214 $281.63 Oversize tube, $99 per order
1-3/8 in. 12 17 SMTE1738 $131.91 Standard
1-3/8 in. 18 23 SMTE2238 $133.26 Standard
1-3/8 in. 31 36 SMTE3638 $221.36 Oversize tube, $39 per order
1-3/8 in. 47 52 SMTE5238 $335.64 Oversize tube, $99 per order
1-1/2 in. 12 17 SMTE1721 $142.35 Standard
1-1/2 in. 18 23 SMTE2221 $164.19 Standard
1-1/2 in. 31 36 SMTE3621 $292.75 Oversize tube, $39 per order
1-1/2 in. 47 52 SMTE5212 $429.93 Oversize tube, $99 per order
1-3/4 in. 18 23 SMTE2334 $243.92 Standard
1-3/4 in. 31 36 SMTE3613 $362.57 Oversize tube, $39 per order
2 in. 18 23 SMTE2202 $270.47 Standard

Prices checked on eldoradotools.com on Nov 17, 2026, per bit. Every SDS-Max bit is sold one at a time. Sizes and lengths match ITM's 2026 catalog, p. 88. Browse all SDS-Max drill bits.

How long an SDS Max drill bit do I need?

SMTE2201 · 1 x 16 x 21 in. Measure the wall or the hole, then buy the first length whose drilling depth is at least that number. A bit that's longer than the job is heavier and costs more. A bit that's shorter leaves you an inch from daylight.

Wall or hole depth Length to buy Drills Example (1 in.)
Up to 8 in.: anchor holes, a slab 13 in. 8 SMTE1301, $65.17
8 to 12 in.: an 8 or 12 in. block or poured wall 17 in. 12 SMTE1701, $75.28
12 to 16 in.: a thick foundation wall 21 in. 16 SMTE2201, $79.14
16 to 18 in. 23 in. (1-1/16 in. and up) 18 SMTE2311, $112.34
18 to 31 in.: footings, grade beams 36 in. 31 SMTE3601, $163.59
31 to 47 in.: mat foundations, thick retaining walls 52 in. 47 SMTE5201, $202.99
Past 47 in. An X-Tendr extension kit, 1-1/4 in. holes and up See below See the longest-bit section

The 23 in. length starts at 1-1/16 in. For 1 in., the 21 in. bit drills 16 in. and the 36 in. bit drills 31 in. The 15 in. length comes in one size, the 1-1/4 in. SMTE1714, which drills 10 in.

Not every size comes in every length. The 52 in. bits run 5/8 to 1-1/2 in. The 36 in. bits run 5/8 to 1-3/4 in. Under 5/8 in., the longest bit drills 16 in. If the size you need doesn't reach, call us before you buy a size you don't need.

Which SDS Max bit for anchor holes?

SMTE1334 · 3/4 x 8 x 13 in. For anchor holes, buy the 13 in. bit in the diameter your anchor's instructions call for. It drills 8 in. deep, the lightest and cheapest length we sell. Check the hole depth on the anchor's sheet against that 8 in. The anchor maker sets both the bit size and how much deeper than the anchor to drill, so read the sheet in the box.

Size Part Price
3/8 x 8 x 13 in. SMTE1338 $41.82
1/2 x 8 x 13 in. SMTE1312 $41.99
9/16 x 8 x 13 in. SMTE1391 $57.05
5/8 x 8 x 13 in. SMTE1358 $48.80
3/4 x 8 x 13 in. SMTE1334 $50.59
7/8 x 8 x 13 in. SMTE1378 $59.57
1 x 8 x 13 in. SMTE1301 $65.17

Prices checked on eldoradotools.com on Nov 17, 2026. ITM makes the X-Cutter to ANSI specification (ITM 2026 catalog, p. 88). If your anchor's instructions name a bit standard, check it against that.

Setting 3/8 or 1/2 in. drop-ins overhead with an SDS-Max hammer? Run SDS-Plus stop bits through the 725MAX001 adapter ($75.16), and see the drop-in anchor drill bit guide for the stop depths.

Data centers. Rack, equipment and cable-tray anchors go into the slab with the same 13 in. bits: SMTE1312 (1/2 in.), SMTE1358 (5/8 in.) and SMTE1334 (3/4 in.), sized to the anchor's instructions. Shop the rack and equipment anchor and coring and penetration steps, or see every data-center job on our data center page.

What is the longest SDS Max drill bit?

SMTE5201 · 1 x 47 x 52 in. The longest one-piece SDS Max drill bits we sell are 52 in. long and drill 47 in. deep, in 5/8, 3/4, 7/8, 1, 1-1/4, 1-3/8 and 1-1/2 in. They ship one to a tube (ITM 2026 catalog, p. 88).

Size Drilling depth (in.) Part Price
5/8 in. 47 SMTE5258 $142.12
3/4 in. 47 SMTE5234 $151.06
7/8 in. 47 SMTE5278 $192.29
1 in. 47 SMTE5201 $202.99
1-1/4 in. 47 SMTE5214 $281.63
1-3/8 in. 47 SMTE5238 $335.64
1-1/2 in. 47 SMTE5212 $429.93

Prices checked on eldoradotools.com on Nov 17, 2026. Freight: one $99 oversize tube per order, however many you add; free on orders of $500 or more.

Past 47 in., you need an SDS-Max extension: the ITM X-Tendr adapter (XT6700, $261.22) and one shaft, up to 82-1/2 in. (XT6704, $152.48). ITM limits the system to one adapter and one shaft, and the adapter only follows the bit into the hole when the bit is 1-1/4 in. or larger (ITM 2026 catalog, p. 89). Under 1-1/4 in., 47 in. is as deep as a bit we sell will go. The SDS Max extension and adapter guide works out when a kit beats a long bit.

X-Tendr part Length (in.) Part Price
Adapter 7-1/2 XT6700 $261.22
Extension shaft 12-1/2 XT6701 $42.84
Extension shaft 30 XT6702 $52.67
Extension shaft 44 XT6703 $71.89
Extension shaft 82-1/2 XT6704 $152.48

Prices checked on eldoradotools.com on Nov 17, 2026. Each part is sold individually; the adapter is 1-3/16 x 7-1/2 in. (ITM 2026 catalog, p. 89).

How do you drill a deep hole through rebar?

SMTE1301 + SMTE5201 · 1 in. Start a deep hole with a short bit of the same diameter, then finish it with the long one. ITM shows the method in its own demo: drill about 8 in. with the short bit, past any rebar, then put in the long bit to finish. In ITM's words, you don't start a hole with the long bit: "it's just too heavy."

ITM uses the same diameter for the starter, not a smaller pilot. Here are the pairs for every 52 in. bit.

Size Long bit Short starter Both Freight for both
5/8 in. SMTE5258, $142.12 SMTE1358, $48.80 (13 in.) $190.92 $99
3/4 in. SMTE5234, $151.06 SMTE1334, $50.59 (13 in.) $201.65 $99
7/8 in. SMTE5278, $192.29 SMTE1378, $59.57 (13 in.) $251.86 $99
1 in. SMTE5201, $202.99 SMTE1301, $65.17 (13 in.) $268.16 $99
1-1/4 in. SMTE5214, $281.63 SMTE1714, $106.09 (15 in.) $387.72 $99
1-3/8 in. SMTE5238, $335.64 SMTE1738, $131.91 (17 in.) $467.55 $99
1-1/2 in. SMTE5212, $429.93 SMTE1721, $142.35 (17 in.) $572.28 Free

Prices checked on eldoradotools.com on Nov 17, 2026. The short bit adds no freight: the order pays one oversize charge, and none at $500 or more.

All X-Cutters are made for reinforced concrete. ITM's 2026 catalog lists rebar chamfers on the head and rates the line for reinforced concrete, brick, masonry and stone. When a bit stops dead on a bar you can't move off, switch to a rebar cutter for that bar. Our rebar drill bit guide covers the cutters and how to use them.

"Read the middle number on the tube. A 1 x 31 x 36 drills 31 inches, not 36. Buy it for a 30-inch footing and you're through with an inch to spare. Buy by the last number and you come up five inches short with the crew standing there."

— David Castro, Eldorado Tools

X-Cutter, tunnel bore or core bit: which head?

950CC7337 · 2-1/8 x 22 in. Pick the head by hole size. Up to 2 in., use a solid X-Cutter. From 1-3/4 to 3-1/8 in., use a tunnel bore drill, which ITM rates for fast, continuous drilling. Past 3-1/8 in., use a core bit.

Head Sizes we sell Lengths What ITM says From
X-Cutter (4-cutter, solid) 3/8 to 2 in. 13 to 52 in. Welded one-piece solid carbide head up to 1-1/8 in.; rebar chamfers; drills reinforced concrete; ANSI specification (2026 catalog, p. 88) SMTE1338, $41.82
Tunnel bore drill 1-3/4 to 3-1/8 in. 22 and 39 in. overall One-piece, fixed centering point, tungsten carbide tip (2026 catalog, p. 91) 950CC7333, $253.85
Core bit 2 to 6 in. 12 and 22 in. overall Cuts 3 in. before you break out the core; pilot drill included (2026 catalog, p. 91) SDS-Max core bits

Every solid SDS-Max drill bit we stock is a 4-cutter. We don't sell 2-cutter SDS-Max bits. The tunnel bore drills:

Size Overall (in.) Part Price Ships
1-3/4 in. 22 950CC7333 $253.85 Standard
1-3/4 in. 39 950CC7342 $305.88 Oversize tube, $39 per order
2-1/8 in. 22 950CC7337 $260.23 Standard
2-1/8 in. 39 950CC7343 $343.27 Oversize tube, $39 per order
2-1/2 in. 22 950CC7339 $301.69 Standard
2-1/2 in. 39 950CC7344 $370.45 Oversize tube, $39 per order
3-1/8 in. 22 950CC7341 $340.06 Standard
3-1/8 in. 39 950CC7345 $424.83 Oversize tube, $39 per order

Prices checked on eldoradotools.com on Nov 17, 2026. ITM doesn't publish a drilling depth for tunnel bore drills; measure against your wall. For bigger holes, see the concrete core drill bit guide.

What does it cost to ship a long SDS Max bit?

SMTE3601 · 1 x 31 x 36 in. Bits up to 23 in. ship at our standard rate. The 36 in. bits and the 39 in. tunnel bore drills ship in an oversize tube for $39 per order. The 52 in. bits ship for $99 per order. Both oversize charges are one per order, however many bits you add, and both are free once the order reaches $500.

What's in the order Freight Free at
Bits up to 23 in. long $15 standard $200
Any 36 in. bit or 39 in. tunnel bore drill $39, one per order $500
Any 52 in. bit $99, one per order $500

Rates checked at checkout on Nov 17, 2026, continental U.S.

Here is what each extra length costs for a 1 in. hole, with the freight when that bit is the only long one in an order under $500.

How to read this chart: each bar is one 1 in. bit, shortest at the top; the number at the end is what that bit costs delivered when it's the only long bit in an order under $500.

1 in. bit length Delivered price, bit alone ($) What that covers
13-inch $80.17 Drills 8 in.: SMTE1301 $65.17 + $15 standard shipping
17-inch $90.28 Drills 12 in.: SMTE1701 $75.28 + $15 standard shipping
21-inch $94.14 Drills 16 in.: SMTE2201 $79.14 + $15 standard shipping
36-inch $202.59 Drills 31 in.: SMTE3601 $163.59 + $39 oversize tube
52-inch $301.99 Drills 47 in.: SMTE5201 $202.99 + $99 oversize tube

Takeaway: going from 31 to 47 in. of reach on a 1 in. hole adds $99.40 delivered. Buy the length the wall needs, not one longer.

Prices checked on eldoradotools.com on Nov 17, 2026.

Which SDS Max bits do foundation, data center and electrical crews buy?

SMTE1701 · 1 x 12 x 17 in. Stock one short bit for anchors and one long bit for the thickest wall you drill through, in the same diameter. Size the hole from the anchor, sleeve or conduit maker's instructions, then read across for the length.

Trade Job Drill through Bit Price
Foundation repair Anchor bolts for brackets in a footing Hole up to 8 in. SMTE1334, 3/4 x 8 x 13 in. $50.59
Foundation repair Through a basement wall 8 to 12 in. wall SMTE1701, 1 x 12 x 17 in. $75.28
Foundation repair Through a footing or grade beam Up to 31 in. SMTE3601, 1 x 31 x 36 in. $163.59
Data center Rack and equipment anchors in the slab Hole up to 8 in. SMTE1358, 5/8 x 8 x 13 in. $48.80
Data center Through-slab penetration, 2 in. hole Slab up to 18 in. SMTE2202, 2 x 18 x 23 in. $270.47
Data center Through-slab penetration, 2-1/2 in. hole Slab, measure against 22 in. overall 950CC7339, 2-1/2 x 22 in. $301.69
Electrical Conduit through a foundation wall, 1-1/2 in. hole 12 in. wall SMTE1721, 1-1/2 x 12 x 17 in. $142.35
Electrical Conduit through a thick wall, 1-1/2 in. hole Up to 47 in. SMTE5212, 1-1/2 x 47 x 52 in. $429.93

Prices checked on eldoradotools.com on Nov 17, 2026. Hole sizes in this table are examples; use the size your anchor, sleeve or conduit instructions give. More for these trades: foundation repair tools, foundation wall anchors and coring, and the data center page.

FAQ

Are SDS Max drill bits universal?

Yes, across SDS-Max machines. An SDS-Max bit fits any rotary hammer with an SDS-Max chuck, whatever the brand. ITM makes its X-Cutters under a Bosch license (2026 catalog, p. 88).

Will an SDS Max bit fit an SDS Plus hammer?

No. The SDS-Max shank is about 3/4 in. across and won't go into an SDS-Plus chuck. We don't sell an adapter for that. The 725MAX001 adapter goes the other way: SDS-Plus bits in an SDS-Max hammer.

Why does my SDS Max bit get stuck deep in the hole?

Usually dust packing the flutes, a stack that's gone crooked, or a long bit that started the hole. Pull back often to clear dust, keep the bit straight, and start deep holes with a short bit of the same size.

Why does a 9/16 in. bit cost more than a 5/8 in. bit?

ITM prices it that way: its 2026 list price for the 9/16 x 13 in. SMTE1391 is higher than for the 5/8 x 13 in. SMTE1358. Our prices follow ITM's list.

Can an extension follow a 1 in. bit into the hole?

No. The X-Tendr adapter only passes through a hole 1-1/4 in. or larger, ITM says. For a 1 in. hole up to 47 in. deep, buy a one-piece bit such as SMTE5201.

What does the X in X-Cutter mean?

It's the head: ITM's catalog lists every bit in the line with an X-CUTTER head, the cross-shaped carbide tip you see end-on. Our product listings describe it as a 4 x 90° carbide head.

Not sure which length clears your wall? Call our team at (833) 4-ETOOLS or email sales@eldoradotools.com with the hole size and the thickness, and we'll name the part.

Related: SDS Plus vs SDS Max, SDS Max extensions and adapters, drilling through rebar, SDS chisel bits and concrete core drill bits.

Sources: ITM 2026 catalog, p. 88 (X-Cutter sizes, drilling depths, head and use), p. 89 (X-Tendr), p. 91 (tunnel bore drills, core bits); ITM video "Extra Long Hammer Drills for Deep Holes in Concrete" (starter-bit method). Prices from eldoradotools.com and freight from our checkout on Nov 17, 2026.

First published Nov 17, 2026, with prices checked on Nov 17, 2026.

← Back to Blog & Guides
Vanessa Franchesca
Written by Vanessa Franchesca

Vanessa Franchesca is a highly skilled professional with a passion for policy, marketing, and digital strategy. With a proven track record of success, she has excelled in developing and implementing effective campaigns. Vanessa's expertise lies in policy development, social media management, content creation, and brand development. Her strong analytical skills and creativity allow her to deliver impactful results for her clients. With a Bachelor's degree in Social Sciences from Harvard University’s Extension School with a concentration in Government, and years of experience in the industry, Vanessa is dedicated to driving growth and helping businesses and people thrive in the digital landscape. Connect with her on LinkedIn to explore new opportunities and stay updated on the latest marketing trends.