Free shipping over $200 · Supplying commercial contractors across the continental U.S.
Free shipping over $200
Nothing in the menu matches that search. The search bar above looks through every product.
Shower Doors289 products
Electricians302 products
HVAC363 products
Plumbing341 products
Metal Fabrication & Welding1,096 products
Foundation & Basement Repair653 products
Data Center Construction1,050 products
Automotive & Collision Repair1,186 products
Don’t see your trade? Call 833-438-6657 — we’ll put a list together.
Which drop in anchor drill bit fits your rod: bit size and stop depth for 1/4 to 3/4 in. drop-ins, checked against four anchor makers, wi...
Concrete Core Drill Bit: Wet, Dry, Diamond, Carbide, SDS-MaxGuide · Electrical
Masonry Drill Bits: Slow Spiral, Cyclo Twist or Hammer-RatedGuide · Electrical
Long Carbide Burrs and Mini Burrs for Pipe, Tanks and PortsGuide · Metal Fabrication
Single Cut vs Double Cut Carbide Burrs: Which Cut for Steel?Guide · Metal Fabrication
Carbide Burr Shapes Chart: Match Head to Cut (SA to SN)Guide · Metal Fabrication
Deburring Tool for Metal: 82° vs 90°, Flutes, and Hole SizeGuide · Glass & Shower
1/4" x 5/8" SG-1 Pointed Tree Carbide Burr, Double Cut is backordered and will ship as soon as it is back in stock.
1/4" x 5/8" SG-1 Pointed Tree Carbide Burr, Double Cut
1/4" x 5/8" SG-1 Pointed Tree Carbide Burr, Double Cut is backordered and will ship as soon as it is back in stock.
Walter's 01V burrs are the heavy-duty end of the carbide burr range: solid tungsten carbide heads on a 1/4" shank, brazed with a high-strength joint that is built to stop the head snapping off the shank under load. Double cut means two sets of flutes crossing each other, which breaks the swarf into small chips instead of long curls — you get more control, a finer finish and far less grabbing than a single cut burr, which is why it is the cut most shops run on steel and stainless. Walter grinds these for concentricity and balance, so they run true without the vibration that chatters a finish and shortens tool life. This is the SG-1: a 1/4" pointed tree head with a 5/8" length of cut on a 1/4" shank. Surface milling and narrow contour work.
Flat $15 shipping until then.
Why crews buy here
Premium bits, blades and abrasives, sold in the quantities a crew actually uses.
We supply commercial contractors across the continental United States with premium, top-tier cutting tools, in bulk. That saves you money and makes purchasing easy.
Orders ship from manufacturer distribution centers across the U.S., so the bits get to the job, not just to a warehouse.
Your foreman, your purchaser and your branches share one account.
Open a contractor account and stop putting bits on a personal card.
Fair pricing, with the per-piece price shown on the page.
Tell other crews how the tool worked on the job.
Free shipping over $200 applies in the continental U.S.; oversized items may vary.
Call 833-438-6657, 8 AM to 4 PM MST. We know the parts, not just the part numbers.
Walter's 01V burrs are the heavy-duty end of the carbide burr range: solid tungsten carbide heads on a 1/4" shank, brazed with a high-strength joint that is built to stop the head snapping off the shank under load. Double cut means two sets of flutes crossing each other, which breaks the swarf into small chips instead of long curls — you get more control, a finer finish and far less grabbing than a single cut burr, which is why it is the cut most shops run on steel and stainless. Walter grinds these for concentricity and balance, so they run true without the vibration that chatters a finish and shortens tool life. This is the SG-1: a 1/4" pointed tree head with a 5/8" length of cut on a 1/4" shank. Surface milling and narrow contour work.
