2-1/2" Carbide Core Drill
2-1/2" Carbide Core Drill
Vendor: ITM
About this Heavy Duty Rotary Hammer Core Bit:
Unleash the power of the 2-1/2" Carbide Core Drill by ITM with your SDS-Max electric rotary hammer machine. Crafted from special alloy steel and Tungsten Carbide, this drill bit is built to withstand continuous hammering. Don't forget to grab a pilot drill bit and extension to complete your drilling arsenal.
- Size: 2-1/2" Core Bit
- # Teeth: 9
- 4” OAL / Taper
- Part # 719CB0065
Specifications:
- Ensure a clean surface by wiping off oil or lubricant from the extension and core bit.
- Insert the pilot drill into the drive extension first for a smooth drilling process.
- Begin drilling until the core bit penetrates 3/8” into the material.
- Use the ejector key to remove the pilot drill when needed.
- Continue drilling until the core bit fills with material, typically 3” deep.
- Break down drilled material inside the bit with a chisel if necessary.
- Repeat steps to reach your desired hole depth effectively.
Instructions:
About Proper Usage:
Important: To prevent damage, always use a pilot drill bit with your core bit. Avoid drilling without it as it can cause excessive pressure and potential breakage to the extension. Remember, safety first for a successful drilling experience!
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
